- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Nordel® IP 4725P General Purpose Molding
Dow Nordel® IP 4725P General Purpose Molding
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Dow Chemical |
| Trade Name | Nordel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Nordel® IP 4725P General Purpose Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
FormulationNordel® IP 4725P
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.168 g/cc | 0.04220 lb/in³ | |
| Mooney Viscosity | 31 @Temperature 100 °C |
31 @Temperature 212 °F |
ML 1 + 4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 77 | 77 | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tensile Strength, Ultimate | 13.4 MPa | 1940 psi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Elongation at Break | 360 % | 360 % | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 100% Modulus | 0.00550 GPa | 0.798 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 200% Modulus | 0.0103 GPa | 1.49 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 300% Modulus | 0.0128 GPa | 1.86 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tear Strength | 48.5 kN/m | 277 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Compression Set | 76 % @Temperature 125 °C |
76 % @Temperature 257 °F |
Pellets cured MDR TC95 + 15 min at 160°C, 70 hr at 125°C; Method B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -21.0 °C | -5.80 °F | Temperature Retraction, TR-10 |
Users viewing this material also viewed the following:
- RheTech Products GC10P250-00 10% Glass Fiber Reinforced Polypropylene Copolymer, Non-UV Stabilized, Chemically Coupled, Natural
- Osprey Metals Fe50Ni Binary Alloy Powder (Grade 95% - 16)
- Overview of materials for Ethylene Vinyl Acetate Copolymer (EVA), Molded/Extruded
- Albis Plastics Cellulose Acetate Propionate CP800 (Base Grade), 8% Plasticizer (discontinued **)
- ExxonMobil Mobil Velocite 3
- EMS-Grivory Grivory® GV-6 FWA nat PA*-GF60
- Carpenter BioDur™ 316LS Stainless Medical Implant Alloy, 70% Cold Worked
- A. Schulman ComAlloy Hiloy® 283 PPO Alloy, Glass Reinforced
- Asahi Kasei Tenac®-C 4563 Copolymer Acetal Resin
Copyright © lookpolymers.com All Rights Reserved