- HOME
- POLYMER SEARCH
- Adhesive
- Dow Corning SE 4430 KIT
Dow Corning SE 4430 KIT
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning SE 4430 KIT.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part, thermally conductive elastomer, soft, good thermal conducitvity, UL 94 V-0 rating, low viscosity.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.20 g/cc @Temperature 25.0 °C |
2.20 g/cc @Temperature 77.0 °F |
|
| Viscosity | 5600 cP | 5600 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore OO | 70 | 70 | |
| Tensile Strength, Ultimate | 0.414 MPa | 60.0 psi | |
| Penetration P(0), 1/10 mm | 35 | 35 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 174 µm/m-°C | 96.7 µin/in-°F | |
| Thermal Conductivity | 0.950 W/m-K | 6.59 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F | |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.90e+14 ohm-cm | 1.90e+14 ohm-cm | |
| Dielectric Constant | 4.0 @Frequency 1.00e+6 Hz |
4.0 @Frequency 1.00e+6 Hz |
|
| 4.6 @Frequency 100 Hz |
4.6 @Frequency 100 Hz |
||
| 4.6 @Frequency 100000 Hz |
4.6 @Frequency 100000 Hz |
||
| Dielectric Strength | 17.9 kV/mm | 455 kV/in | |
| Dissipation Factor | 0.00015 @Frequency 100000 Hz |
0.00015 @Frequency 100000 Hz |
|
| 0.0020 @Frequency 100 Hz |
0.0020 @Frequency 100 Hz |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 1.90 min @Temperature 150 °C |
0.0317 hour @Temperature 302 °F |
|
| 2.50 min @Temperature 125 °C |
0.0417 hour @Temperature 257 °F |
||
| 3.50 min @Temperature 100 °C |
0.0583 hour @Temperature 212 °F |
||
| 420 min @Temperature 22.0 °C |
7.00 hour @Temperature 71.6 °F |
||
| Shelf Life | 8.00 Month | 8.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | grey | |
| Hydrophobic | yes | |
| Self Leveling | yes | |
| Water Resistant | yes | |
| Working Time (min) | 240 |
Users viewing this material also viewed the following:
- Inno-Comp INNOPOL® CS 2-1000 Polypropylene Block-Copolymer
- LTL Color Compounds ColorRxâ„¢ PC-1000RX Biocompatible Polycarbonate
- Solvay TECHNYL® C 206 PA6, DRY
- Saint-Gobain CHR® 2265-2 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape
- Sibur SKI-3 1st Grade, 3rd Group Isoprene Rubber (IR)
- SABIC Innovative Plastics LNP VERTON RX89047 PA 66 (Europe-Africa-Middle East)
- Arkema Group Rilsan® Fine Powders Grey 49 Polyamide 11
- Arkema Group Rilsan® BECN W3 TL Nylon 11, Sheathing Grade (Dry)
- BASF 2-Ethylhexanol
- 3M Multi-purpose 27 Spray Adhesive
Copyright © lookpolymers.com All Rights Reserved