Diamond Polymers Centrex® 810 Injection Molding Grade

Category	Polymer , Thermoplastic , ASA Polymer
Manufacturer	Diamond and Network Polymers
Trade Name	Centrex®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Diamond Polymers Centrex® 810 Injection Molding Grade.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Centrex 810 resin is a soft-flow, high-gloss, and medium-impact grade of ASA (acrylonitrile-styrene-acrylate). It is an injection molding grade with a good balance of physical properties, gloss and processing performance, along with good resistance to weather aging. As with any product, use of Centrex 810 resin must be tested (including field testing, etc.) in advance by the user to determine suitability.Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.06 g/cc	1.06 g/cc	ASTM D792
Linear Mold Shrinkage	0.0050 - 0.0060 cm/cm	0.0050 - 0.0060 in/in	ASTM D955
Melt Flow	21 g/10 min @Load 10.0 kg, Temperature 220 °C	21 g/10 min @Load 22.0 lb, Temperature 428 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	100	100	ASTM D785
Tensile Strength, Yield	40.7 MPa	5900 psi	chs 2.0 in/min; ASTM D638
Tensile Modulus	2.46 GPa	357 ksi	chs 2.0 in/min; ASTM D638
Flexural Strength	70.3 MPa	10200 psi	chs 0.05 in/min; ASTM D790
Flexural Modulus	2.39 GPa	347 ksi	tangent; chs 0.05 in/min; ASTM D790
Izod Impact, Notched	0.534 J/cm @Thickness 3.17 mm, Temperature -30.0 °C	1.00 ft-lb/in @Thickness 0.125 in, Temperature -22.0 °F	ASTM D256
	0.641 J/cm @Thickness 3.17 mm, Temperature 0.000 °C	1.20 ft-lb/in @Thickness 0.125 in, Temperature 32.0 °F	ASTM D256
	0.854 J/cm @Thickness 3.17 mm, Temperature 23.0 °C	1.60 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F	ASTM D256
Impact Test	10.0 J @Temperature -30.0 °C	7.38 ft-lb @Temperature -22.0 °F	ASTM D3763
	40.0 J @Temperature 0.000 °C	29.5 ft-lb @Temperature 32.0 °F	ASTM D3763
	45.0 J @Temperature 23.0 °C	33.2 ft-lb @Temperature 73.4 °F	ASTM D3763

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	74.0 °C	165 °F	0.125";; ASTM D648
	80.0 °C	176 °F	0.25";; ASTM D648
Vicat Softening Point	104 °C @Load 1.00 kg	219 °F @Load 2.20 lb	120°C/hr; ASTM D1525
	93.0 °C @Load 5.00 kg, Thickness 1270 mm	199 °F @Load 11.0 lb, Thickness 50.0 in	ASTM D1525

Users viewing this material also viewed the following: