- HOME
- POLYMER SEARCH
- Lubricant
- Perfluoropolyether (PFPE)
- Nye Lubricants UniFlor 8951 (897-1) (UF) Synthetic Oil
Nye Lubricants UniFlor 8951 (897-1) (UF) Synthetic Oil
| Category | Fluid , Lubricant , Perfluoropolyether (PFPE) , PTFE Gellant |
| Manufacturer | Nye Lubricants |
| Trade Name | UniFlor |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nye Lubricants UniFlor 8951 (897-1) (UF) Synthetic Oil.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Nye Lubricants.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity Measurement | 317 | 317 | Viscosity Index of Base Oil; ASTM D2270 |
| Kinematic Viscosity at 40°C (104°F) | 18 cSt | 18 cSt | Base Oil; ASTM D445 |
| Kinematic Viscosity at 100°C (212°F) | 5.6 cSt | 5.6 cSt | Base Oil; ASTM D445 |
| Evaporation Loss | 0.20 % | 0.20 % | 24 hrs, 100C; ASTM D972 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(0), 1/10 mm | 285 | 285 | ASTM D217 |
| Penetration P(60), 1/10 mm | 293 | 293 | ASTM D217 |
| Oil Separation | 7.1 % | 7.1 % | 24 hrs, 100C; FTM 719B, 321.2 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended |
| Minimum Service Temperature, Air | -90.0 °C | -130 °F | Recommended |
| Pour Point | -90.0 °C | -130 °F | Base Oil; ASTM D97 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Base Fluid Type | PFPE(lin) | |
| Gellant Type | PTFE |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP LUBRICOMP PFP36 PA 6 (Asia Pacific)
- Washington Penn Medium Impact Copolymer 50% Calcium Carbonate Filled
- Total PSC 1340 Crystal Polystyrene
- Hexcel® HexPly® M18 356°F (180°C) Curing Epoxy Matrix
- ExxonMobil LD 071.LQ Blown Film Resin
- Arlon 55580R030 0.030" (0.762 mm) Uncured Silicone Rubber with Fiberglass Substrate
- Carmel Olefins IPETHENE® 600 Low Density Polyethylene
- Polyplastics Duracon® CP-15X Acetal Co-polymer (POM), Creep resistant, Creep resistant
- Samsung Cheil Industries Starex® HF-5661H ASA, Unreinforced (discontinued **)
Copyright © lookpolymers.com All Rights Reserved