Category | Polymer , Thermoplastic , Elastomer, TPE , Polyester TPE , Polyester, TP , Polyether Ester Elastomer |
Manufacturer | DSM Engineering Plastics |
Trade Name | Arnitel® |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | DSM Arnitel® EM550 Polyether Ester Elastomer (European and Asian Grade).pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
Water Absorption | 0.65 % | 0.65 % | Sim. to ISO 62 |
Moisture Absorption at Equilibrium | 0.20 % | 0.20 % | Humidity Absorption; Sim. to ISO 62 |
Melt Flow | 9.68 g/10 min @Load 2.16 kg, Temperature 230 °C |
9.68 g/10 min @Load 4.76 lb, Temperature 446 °F |
Calculated from Volume Flow Rate of 8 cm<sup>3</sup>/10min.; ISO 1133 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Shore D | 53 | 53 | 3s; ISO 868 |
Tensile Strength, Yield | 11.8 MPa @Strain 10.0 % |
1710 psi @Strain 10.0 % |
ISO 527-1/-2 |
12.0 MPa @Strain 100 % |
1740 psi @Strain 100 % |
ISO 527-1/-2 | |
Elongation at Break | >= 300 % | >= 300 % | ISO 527-1/-2 |
Elongation at Yield | 20 % | 20 % | ISO 527-1/-2 |
Tensile Modulus | 0.200 GPa | 29.0 ksi | ISO 527-1/-2 |
Izod Impact, Notched (ISO) | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 180/4A |
Charpy Impact, Notched | 2.50 J/cm² @Temperature -30.0 °C |
11.9 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 179/1eA |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear, Parallel to Flow | 150 µm/m-°C @Temperature 20.0 °C |
83.3 µin/in-°F @Temperature 68.0 °F |
ISO 11359-1/-2 |
CTE, linear, Transverse to Flow | 150 µm/m-°C @Temperature 20.0 °C |
83.3 µin/in-°F @Temperature 68.0 °F |
ISO 11359-1/-2 |
Melting Point | 207 °C | 405 °F | 10°C/min; ISO 11357-1/-3 |
Vicat Softening Point | 90.0 °C | 194 °F | 50°C/h 50N; ISO 306 |
190 °C | 374 °F | 50°C/h 10N; ISO 306 | |
Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
IEC 60695-11-10 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 2.00e+12 ohm-cm | 2.00e+12 ohm-cm | IEC 60093 |
Surface Resistance | 8.00e+10 ohm | 8.00e+10 ohm | IEC 60093 |
Dielectric Constant | 4.3 @Frequency 1e+6 Hz |
4.3 @Frequency 1e+6 Hz |
IEC 60250 |
20 @Frequency 100 Hz |
20 @Frequency 100 Hz |
IEC 60250 | |
Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 |
Dissipation Factor | 0.012 @Frequency 1e+6 Hz |
0.012 @Frequency 1e+6 Hz |
IEC 60250 |
Comparative Tracking Index | 600 V | 600 V | IEC 60112 |
Descriptive Properties | Value | Comments |
---|---|---|
Film Extrusion | Yes | |
High impact or impact modified | Yes | |
Injection molding | Yes | |
Other Extrusion | Yes | |
Profile extrusion | Yes | |
Without Fillers | Yes |