Covestro Texin® 285 Urethane Thermoplastic Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP
Manufacturer	Covestro
Trade Name	Texin®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Covestro Texin® 285 Urethane Thermoplastic Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Key Features:UnfilledSuitable processing methods:Injection moldingFilm extrusionProfile extrusionSheet extrusionCoatingBlow moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/in³

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	5.00 MPa @Strain 50.0 %	725 psi @Strain 50.0 %
Elongation at Break	>= 50 %	>= 50 %

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	150 µm/m-°C @Temperature 20.0 °C	83.3 µin/in-°F @Temperature 68.0 °F
Vicat Softening Point	91.0 °C	196 °F	50°C/h 50N
Glass Transition Temp, Tg	-42.0 °C	-43.6 °F	10°C/min
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL Recognized
	V-2 @Thickness 3.00 mm	V-2 @Thickness 0.118 in	UL Recognized

Electrical Properties	Metric	English
Volume Resistivity	8.00e+9 ohm-cm	8.00e+9 ohm-cm
Surface Resistance	5.00e+11 ohm	5.00e+11 ohm
Dielectric Constant	5.6 @Frequency 1e+6 Hz	5.6 @Frequency 1e+6 Hz
	6.5 @Frequency 100 Hz	6.5 @Frequency 100 Hz
Dielectric Strength	17.5 kV/mm	445 kV/in
Dissipation Factor	0.025 @Frequency 100 Hz	0.025 @Frequency 100 Hz
	0.060 @Frequency 1e+6 Hz	0.060 @Frequency 1e+6 Hz

Processing Properties	Metric	English	Comments
Melt Temperature	200 °C	392 °F	Injection Molding
Mold Temperature	30.0 °C	86.0 °F	Injection Molding
Injection Pressure	45.0 MPa	6530 psi

Users viewing this material also viewed the following: