Covestro Makroblend® EL-700 Polycarbonate + Polyester Blend

Category	Polymer , Thermoplastic , Polycarbonate (PC) , Polyester, TP
Manufacturer	Covestro
Trade Name	Makroblend®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Covestro Makroblend® EL-700 Polycarbonate + Polyester Blend.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Key Features:Flame retarding agentUnfilledHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.

Physical Properties	Metric	English	Comments
Density	1.28 g/cc	0.0462 lb/in³
Water Absorption	0.28 %	0.28 %
Moisture Absorption at Equilibrium	0.090 %	0.090 %	23°C/50% R.H.
Melt Flow	14 g/10 min @Load 5.00 kg, Temperature 265 °C	14 g/10 min @Load 11.0 lb, Temperature 509 °F	cm³/10 min.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	58.0 MPa	8410 psi
Elongation at Break	>= 50 %	>= 50 %	Nominal
Elongation at Yield	5.0 %	5.0 %
Tensile Modulus	2.30 GPa	334 ksi

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	67.0 µm/m-°C @Temperature 20.0 °C	37.2 µin/in-°F @Temperature 68.0 °F
CTE, linear, Transverse to Flow	67.0 µm/m-°C @Temperature 20.0 °C	37.2 µin/in-°F @Temperature 68.0 °F
Deflection Temperature at 0.46 MPa (66 psi)	124 °C	255 °F
Deflection Temperature at 1.8 MPa (264 psi)	106 °C	223 °F
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in	UL Recognized
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in	UL Recognized
	5VA @Thickness 3.00 mm	5VA @Thickness 0.118 in	UL Recognized

Electrical Properties	Metric	English
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm
Dielectric Constant	3.08 @Frequency 100 Hz	3.08 @Frequency 100 Hz
	3.08 @Frequency 1e+6 Hz	3.08 @Frequency 1e+6 Hz
Dielectric Strength	29.0 kV/mm	737 kV/in
Dissipation Factor	0.00090 @Frequency 100 Hz	0.00090 @Frequency 100 Hz
	0.0080 @Frequency 1e+6 Hz	0.0080 @Frequency 1e+6 Hz

Processing Properties	Metric	English	Comments
Melt Temperature	270 °C	518 °F	Injection Molding
Mold Temperature	65.0 °C	149 °F	Injection Molding
Injection Pressure	60.0 MPa	8700 psi

Users viewing this material also viewed the following: