- HOME
- POLYMER SEARCH
- Nonferrous Metal
- Nickel Alloy
- California Fine Wire Nickel Alloy 99
California Fine Wire Nickel Alloy 99
| Category | Metal , Nonferrous Metal , Nickel Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Nickel Alloy 99.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.89 g/cc | 0.321 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 345 MPa | 50000 psi | Annealed |
| 621 MPa | 90000 psi | Stress relieved | |
| 758 MPa | 110000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 20.0 °C |
8.33 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.544 J/g-°C @Temperature 20.0 °C |
0.130 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 185 W/m-K | 1280 BTU-in/hr-ft²-°F | |
| Melting Point | 1450 °C | 2642 °F | |
| Maximum Service Temperature, Air | 593 °C | 1100 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Nickel, Ni | 99.8 % | 99.8 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.00000798 ohm-cm | 0.00000798 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Strong | |
| Temperature Coefficient of Resistance | 0.006 ohms/ohm-°C | 0-100°C |
Users viewing this material also viewed the following:
- Victrex® Vicote® 705 Black Polyetheretherketone (PEEK) Powder Coating
- Solvay Specialty Polymers Udel® GF-110 Polysulfone (PSU) (Unverified Data**)
- Solvay Specialty Polymers Udel® P-1710 Polysulfone (PSU) (Unverified Data**)
- Lanxess Durethan® DP AKV 50 HR H2.0 901510 Nylon 66, 50% Glass Fiber
- Techmer ES Electrablend® ABS 03106 MB Stainless Steel Filled
- Solvay Specialty Polymers Ryton® R-7-190NA Polyphenylene Sulfide (PPS), GlassMineral Filled
- Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Rod, 3 Part Heat Treatment, 0.562 inch (14.3 mm) Diameter
- Westlake Elevate™ EM518 18.5% Ethylene Vinyl Acetate Copolymer
- DuPont Teijin Films Melinex® 377 Polyester Film, 92 Gauge
- Fainplast Compounds CL 83 Flexible PVC, Sheathing
Copyright © lookpolymers.com All Rights Reserved