- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Nickel Alloy 90 Copper Nickel Resistance Wire
California Fine Wire Nickel Alloy 90 Copper Nickel Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Copper Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Nickel Alloy 90 Copper Nickel Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.89 g/cc | 0.321 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 241 MPa | 35000 psi | Annealed |
| 517 MPa | 75000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 16.0 µm/m-°C @Temperature 20.0 °C |
8.89 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.385 J/g-°C @Temperature 20.0 °C |
0.0920 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 60.0 W/m-K | 416 BTU-in/hr-ft²-°F | |
| Melting Point | 1100 °C | 2012 °F | |
| Maximum Service Temperature, Air | 800 °C | 1470 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Copper, Cu | 90 % | 90 % | |
| Nickel, Ni | 10 % | 10 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000150 ohm-cm | 0.0000150 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | None | |
| Temperature Coefficient of Resistance | 0.0004 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | -0.026 |
Users viewing this material also viewed the following:
- Nilit FRIANYL A63 GV35 Nylon 6.6 for injection molding, 35% glass fiber reinforced
- SABIC Innovative Plastics ULTEM 1010 PEI (Asia Pacific)
- SABIC Innovative Plastics LNP VERTON MV008SU PP
- Trelleborg AEM Eccospheres® SI-310 Sodium Borosilicate Glass Microspheres
- Eagle Brass 752 Nickel Silver 18%, 1/2 Hard
- ExxonMobil LDPE LD 251 Low Density Polyethylene Resin (European Grade)
- Eurostar Starflam M10009AP PP, Flame Retardant, Injection Molding
- 3M Cushion-Mount™ E1015 Plus Plate Mounting Tapes with Easy Mount Adhesive
Copyright © lookpolymers.com All Rights Reserved