Bulk Molding Compounds BMC T60-6009 Compression Grade Wear Resistant Molding Compound

Category	Polymer , Thermoset , Polyester, TS , Polyester (Thermoset) - Rigid
Manufacturer	BMC - Bulk Molding Compounds Inc.
Trade Name	BMC
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Bulk Molding Compounds BMC T60-6009 Compression Grade Wear Resistant Molding Compound.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

BMC T60-6009 is a compression grade wear resistant molding compound. This material was specifically formulated for applications that require excellent abrasion resistance. Due to its low specific gravity it has substantial cost per cubic inch savings. BMC T60-6009 is UL listed and is typically used in power distribution equipment, switching components/relays, constant use switch applications and circuit protection breakers.Information provided by Bulk Molding Compounds, Inc.

Physical Properties	Metric	English	Comments
Density	1.52 - 1.72 g/cc	0.0549 - 0.0621 lb/in³	Molded
Linear Mold Shrinkage	0.0030 - 0.0040 cm/cm	0.0030 - 0.0040 in/in

Mechanical Properties	Metric	English
Hardness, Barcol	5.0 - 10	5.0 - 10
Tensile Strength	31.0 - 44.8 MPa	4500 - 6500 psi
Flexural Strength	58.6 - 86.2 MPa	8500 - 12500 psi
Flexural Modulus	3.79 - 5.17 GPa	550 - 750 ksi
Compressive Strength	95.1 - 123 MPa	13800 - 17800 psi
Izod Impact, Notched	1.60 - 2.67 J/cm	3.00 - 5.00 ft-lb/in

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	>= 260 °C	>= 500 °F
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Dielectric Strength	13.2 - 15.2 kV/mm	335 - 385 kV/in	short time
Arc Resistance	>= 190 sec	>= 190 sec
Comparative Tracking Index	>= 500 V	>= 500 V

Processing Properties	Metric	English	Comments
Processing Temperature	138 - 166 °C	280 - 330 °F

Users viewing this material also viewed the following: