Borealis Daplen™ EG103AI Polypropylene Compound, Mineral Filled

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 20% Mica Filler
Manufacturer	Borealis
Trade Name	Daplen™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Borealis Daplen™ EG103AI Polypropylene Compound, Mineral Filled.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Daplen™ EG103AI is a 15 % mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and high melt flow rate. Applications: Daplen™ EG103AI has been developed especially for the automotive industry including door panels and pockets, and other automotive interior parts.Information provided by Borealis AG

Physical Properties	Metric	English	Comments
Density	1.02 g/cc	0.0368 lb/in³	ISO 1183
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	mold average;Borealis Method
Melt Flow	26 g/10 min @Load 2.16 kg, Temperature 230 °C	26 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	49.0 MPa	7110 psi	H 358/30
Tensile Strength, Yield	22.0 MPa	3190 psi	50mm/min; ISO 527-2
Elongation at Yield	5.0 %	5.0 %	50mm/min; ISO 527-2
Tensile Modulus	1.80 GPa	261 ksi	1mm/min; ISO 527-2
Flexural Modulus	1.90 GPa	276 ksi	2mm/min; ISO 178
Charpy Impact Unnotched	6.00 J/cm² @Temperature -20.0 °C	28.6 ft-lb/in² @Temperature -4.00 °F	ISO 179/1eU
	15.0 J/cm² @Temperature 23.0 °C	71.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.300 J/cm² @Temperature -20.0 °C	1.43 ft-lb/in² @Temperature -4.00 °F	ISO 179/1eA
	1.50 J/cm² @Temperature 23.0 °C	7.14 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	105 °C	221 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	54.0 °C	129 °F	ISO 75-2
Vicat Softening Point	54.0 °C @Load 5.10 kg	129 °F @Load 11.2 lb	ISO 306
	140 °C @Load 1.02 kg	284 °F @Load 2.25 lb	ISO 306

Processing Properties	Metric	English	Comments
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Mold Temperature	30.0 - 50.0 °C	86.0 - 122 °F
Injection Velocity	100 - 200 mm/sec	3.94 - 7.87 in/sec
Hold Pressure	3.00 - 6.00 MPa	435 - 870 psi

Descriptive Properties	Value	Comments
Emission (µgC/g)	< 60	VDA 277
Fogging (mg)	< 2	DIN 75201;100°C, 16h
Screw Speed	low to medium

Users viewing this material also viewed the following: