BP Amoco Acctuf® 3950 Impact Copolymer Polypropylene (discontinued **)

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Impact Modified; Molded/Extruded
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BP Amoco Acctuf® 3950 Impact Copolymer Polypropylene (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Suggested fabrication methods: Injection moldingFeatures: Low gloss, High melt flow, Low temp impact, NucleatedComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.

Physical Properties	Metric	English	Comments
Density	0.886 - 0.926 g/cc	0.0320 - 0.0335 lb/in³	ASTM D1505
Water Absorption	<= 0.010 %	<= 0.010 %	24 hours; ASTM D570
Linear Mold Shrinkage	0.010 - 0.025 cm/cm	0.010 - 0.025 in/in	ASTM D955
Melt Flow	35 g/10 min @Load 2.16 kg, Temperature 230 °C	35 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	79	79	ASTM D785
Tensile Strength, Yield	24.0 MPa	3480 psi	ASTM D638
Elongation at Break	>= 50 %	>= 50 %	ASTM D638
Flexural Modulus	1.31 GPa	190 ksi	ASTM D790A
Izod Impact, Notched	1.35 J/cm @Diameter 3.17 mm	2.53 ft-lb/in @Diameter 0.125 in	bar; ASTM D256
	0.500 J/cm @Diameter 3.17 mm, Temperature -20.0 °C	0.937 ft-lb/in @Diameter 0.125 in, Temperature -4.00 °F	bar; ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	104 °C	219 °F	ASTM D648

Users viewing this material also viewed the following: