BCC Products BC 6126 Epoxy Surface Coat/Casting

Category	Polymer , Thermoset , Epoxy
Manufacturer	BCC Products
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BCC Products BC 6126 Epoxy Surface Coat/Casting.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

BC 6126 is a gray, low toxicity, aluminum filled, epoxy surface coat. This thixotropic resin system provides excellent surface duplication along with vertical coverage to 1/16 inch thickness. This heat resistant system may be used at room temperature without post-curing. For use above 150°F a post-cure is required. BC 6126 was engineered to replace VCHD and MDA systems while retaining excellent heat resistance. It is designed for consistent use up to 300°F.Uses: constructing vacuum form tools, RTM and RIM molds, compression and injection molds, and matched dies.Information provided by BCC Products, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.47 g/cc	1.47 g/cc

Mechanical Properties	Metric	English
Hardness, Shore D	90 @Temperature 23.9 °C	90 @Temperature 75.0 °F
Tensile Strength, Ultimate	40.0 MPa	5800 psi
Flexural Strength	44.8 MPa	6500 psi
Compressive Strength	193 MPa	28000 psi

Thermal Properties	Metric	English	Comments
CTE, linear	42.5 µm/m-°C	23.6 µin/in-°F
Deflection Temperature at 1.8 MPa (264 psi)	144 °C	291 °F

Processing Properties	Metric	English	Comments
Cure Time	960 min @Temperature 24.0 °C	16.0 hour @Temperature 75.2 °F
Pot Life	45 min @Temperature 24.0 °C	45 min @Temperature 75.2 °F	1 lb. mass

Descriptive Properties	Value	Comments
Mix Ratio	100:10 by weight, 100:15 by volume, resin/harder
Mixed Viscosity, Brookfield	Thixotropic

Users viewing this material also viewed the following: