BASF Ultramid® 8267G HS BK-102 15/25% Glass/Mineral Filled PA6 (Conditioned)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8267G HS BK-102 15/25% Glass/Mineral Filled PA6 (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultramid 8267G HS BK-102 is a heat stabilized, black pigmented, 40% mineral and glass fiber reinforced nylon 6 injection molding compound. It possesses a balance of engineering properties in combination with excellent dimensional stability, low warp and resistance to sink-mark formation. It exhibits high strength, rigidity, and good heat distortion temperature. It resists creep under load and the heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons.

Physical Properties	Metric	English	Comments
Density	1.48 g/cc	0.0535 lb/in³	dry; ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.7 %	5.7 %	beginning dry; ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	beginning dry (23°C/50% R.H.); ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	67.0 MPa	9720 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	67.0 MPa	9720 psi	5mm/min; ISO 527
Elongation at Break	14 %	14 %	5mm/min; ISO 527
	14 %	14 %	0.2 in/min; ASTM Test
Tensile Modulus	4.16 GPa	603 ksi	1mm/min; ISO 527
Flexural Strength	90.0 MPa	13100 psi	ISO Data
Flexural Modulus	3.68 GPa	534 ksi	ISO Data

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	95.0 °C	203 °F	Injection molding

Descriptive Properties	Value	Comments
Color	BK-102
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
UL.UL-C	Yes

Users viewing this material also viewed the following: