BASF Ultramid® 8234G HS 44% Glass Filled PA6 (Conditioned)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8234G HS 44% Glass Filled PA6 (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultramid 8234G HS is a heat stabilized, 44% glass fiber reinforced polyamide 6 injection molding compound offering the highest level of strength, stiffness, high temperature performance and dimensional stability. It is available in natural, black, weather resistance and pigmented versions.

Physical Properties	Metric	English	Comments
Density	1.2784 g/cc	0.046185 lb/in³	Melt; ISO 1183
	1.49 g/cc	0.0538 lb/in³	dry; ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.2 %	5.2 %	beginning dry; ISO 62
Moisture Absorption at Equilibrium	1.5 %	1.5 %	beginning dry (23°C/50% R.H.); ISO 62
Relative Viscosity	2.6 cP	2.6 cP	ISO Test; 96 % SAV
Viscosity Measurement	50	50	Formic Acid
Linear Mold Shrinkage	0.0020 cm/cm	0.0020 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	145 MPa	21000 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	145 MPa	21000 psi	5mm/min; ISO 527
Elongation at Break	6.0 %	6.0 %	5mm/min; ISO 527
	6.0 %	6.0 %	0.2 in/min; ASTM Test
Tensile Modulus	7.49 GPa	1090 ksi	1mm/min; ISO 527
Flexural Strength	212 MPa	30700 psi	ASTM Test
	410 MPa @Temperature -40.0 °C	59500 psi @Temperature -40.0 °F	ASTM Test
Flexural Modulus	6.56 GPa	951 ksi	ASTM Test

Thermal Properties	Metric	English	Comments
Specific Heat Capacity	2.522 J/g-°C	0.6028 BTU/lb-°F	Melt
Thermal Conductivity	0.329 W/m-K	2.28 BTU-in/hr-ft²-°F	Melt
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Comparative Tracking Index	500 V	500 V	IEC 60112

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
UL.UL-C	Yes

Users viewing this material also viewed the following: