BASF Elastollan® S95A Polyester Type Polyurethane Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer	BASF
Trade Name	Elastollan®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Elastollan® S95A Polyester Type Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Recommended for injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fuel and solvent resistance. These products can be injection and blow molded and extruded. As with all TPU products this grade must be dried prior to processing.Property values below are typical values based on test samples cured 20 hours at 100°C before testing. Information provided by BASF Corporation.

Physical Properties	Metric	English	Comments
Density	1.23 g/cc	0.0444 lb/in³	ASTM D792

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	96	96	ASTM D2240
Hardness, Shore D	48	48	ASTM D2240
Tensile Strength, Ultimate	42.0 MPa	6090 psi	ASTM D412
Tensile Strength, Yield	14.0 MPa @Strain 100 %	2030 psi @Strain 100 %	ASTM D-412
	26.0 MPa @Strain 300 %	3770 psi @Strain 300 %	ASTM D-412
Elongation at Break	510 %	510 %	ASTM D412
Tear Strength	150 kN/m	856 pli	ASTM D624
Taber Abrasion, mg/1000 Cycles	50	50	H-18 wheel; ASTM D-1044.
Tensile Set	90 %	90 %	at break; ASTM D-412

Thermal Properties	Metric	English	Comments
Flammability, UL94	HB @Thickness 0.950 mm	HB @Thickness 0.0374 in	Color: NC

Users viewing this material also viewed the following: