- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Unreinforced
- Ashley Polymers Ashlene® 830LW Nylon 6
Ashley Polymers Ashlene® 830LW Nylon 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced |
| Manufacturer | Ashley Polymers |
| Trade Name | Ashlene® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ashley Polymers Ashlene® 830LW Nylon 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Basic Nylon 6, medium viscosity, lubricated for general purpose injection molding.Data provided by the manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
| Water Absorption | 1.6 % | 1.6 % | 24 hrs; ASTM D570 |
| Moisture Absorption at Equilibrium | 2.8 % | 2.8 % | 50% RH; ASTM D570 |
| Water Absorption at Saturation | 9.6 % | 9.6 % | ASTM D570 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength, Ultimate | 83.0 MPa | 12000 psi | ATSM D638 |
| Elongation at Break | 75 % | 75 % | ASTM D638 |
| Elongation at Yield | 8.0 % | 8.0 % | ASTM D638 |
| Flexural Strength | 113 MPa | 16400 psi | ASTM D790 |
| Flexural Modulus | 2.70 GPa | 392 ksi | ASTM D790 |
| Izod Impact, Notched | 0.590 J/cm | 1.11 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 216 °C | 421 °F | ASTM D3418 |
| Deflection Temperature at 0.46 MPa (66 psi) | 182 °C | 360 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 63.0 °C | 145 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz |
3.5 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 16.5 kV/mm | 419 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Amodel® A-1133 NL WH 505 Polyphthalamide (PPA) (Unverified Data**)
- Hardwire 3SX-12-12 Medium Density Composite
- SABIC Innovative Plastics LNP LUBRICOMP YL003C Polyester Elastomer
- A. Schulman POLYFLAM™ RABS 930-01
- ExxonMobil Socony Oven Conveyor Lubricant
- Fainplast Compounds Hax™ HF 417 Flame Retardant Polyolefin Cable Compound
- Huntsman PE7011 Profile Extrusion Polyethylene (discontinued **)
- Von Roll Isola IMI Varnish 707 Solventless Polyester Varnish for Electrical Insulation
- Lushan PR320 Adhesive Resin for Aluminum Plastic Composite Pipe
Copyright © lookpolymers.com All Rights Reserved