Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Lubrizol Estane® 2355-55DE Thermoplastic Polyurethane

Category Polymer , Thermoplastic , Polyurethane, TP
Manufacturer Lubrizol (former Noveon)
Trade Name ESTANE®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Lubrizol Estane® 2355-55DE Thermoplastic Polyurethane.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Type: Pellethane® 2355-55DE is a thermoplastic polyurethane elastomer.Information Provided by The Lubrizol Corporation
Physical Properties Metric English Comments
Specific Gravity 1.19 g/cc
1.19 g/cc
ASTM D792
Linear Mold Shrinkage 0.0090 - 0.013 cm/cm
0.0090 - 0.013 in/in
Flow direction; ASTM D955
Mechanical Properties Metric English Comments
Hardness, Shore D 53
53
ASTM D2240
Tensile Strength, Ultimate 41.4 MPa
6000 psi
ASTM D412
Elongation at Break 500 %
500 %
ASTM D412
50% Modulus 0.00930 GPa
1.35 ksi
ASTM D412
100% Modulus 0.0120 GPa
1.74 ksi
ASTM D412
300% Modulus 0.0248 GPa
3.60 ksi
ASTM D412
Flexural Modulus 0.165 GPa
23.9 ksi
ASTM D790
Tear Strength 114 kN/m
650 pli
Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles 60
60
H-22 (coarser); ASTM D1044
Compression Set 25 %

@Temperature 25.0 °C,
Time 79200 sec
 25 %

@Temperature 77.0 °F,
Time 22.0 hour
 Method B; ASTM D395
35 %

@Temperature 70.0 °C,
Time 79200 sec
 35 %

@Temperature 158 °F,
Time 22.0 hour
 Method B; ASTM D395
Processing Properties Metric English Comments
Melt Temperature 199 - 216 °C
390 - 421 °F
Extrusion
204 - 221 °C
399 - 430 °F
Molding
Mold Temperature 16.0 - 60.0 °C
60.8 - 140 °F
Drying Temperature 88.0 - 104 °C
190 - 219 °F
Air dew point <-40°C
Descriptive Properties Value Comments
Elongation Set After Break (%) 80
ASTM D412
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved