- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Anderman Ceramics EA96 Sintered Alumina, 96%
Anderman Ceramics EA96 Sintered Alumina, 96%
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Anderman Ceramics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Anderman Ceramics EA96 Sintered Alumina, 96%.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High strength alumina (96%) available pink or white. Available in many shapes and sizes.Information provided by Anderman Ceramics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.65 g/cc | 0.132 lb/in³ | |
| Open Porosity | 0.00 % | 0.00 % | Gas Tight |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Mohs | 9.0 | 9.0 | |
| Tensile Strength | 131 MPa | 19000 psi | |
| Flexural Strength | 310 MPa | 45000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 7.50 µm/m-°C @Temperature 20.0 - 1000 °C |
4.17 µin/in-°F @Temperature 68.0 - 1830 °F |
|
| Thermal Conductivity | 23.0 W/m-K @Temperature 20.0 - 100 °C |
160 BTU-in/hr-ft²-°F @Temperature 68.0 - 212 °F |
|
| Maximum Service Temperature, Air | 1600 °C | 2910 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 96 % | 96 % | |
| B2O3 | <= 0.010 % | <= 0.010 % | |
| CaO | 0.020 % | 0.020 % | |
| Fe2O3 | 0.010 % | 0.010 % | |
| MgO | 0.020 % | 0.020 % | |
| Na2O | 0.14 % | 0.14 % | |
| SiO2 | 3.6 % | 3.6 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+6 ohm-cm @Temperature 600 °C |
1.00e+6 ohm-cm @Temperature 1110 °F |
|
| 1.00e+14 ohm-cm @Temperature 20.0 °C |
1.00e+14 ohm-cm @Temperature 68.0 °F |
||
| Dielectric Constant | 9.3 @Frequency 1.00e+6 Hz |
9.3 @Frequency 1.00e+6 Hz |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Thermal Shock Resistance | Medium |
Users viewing this material also viewed the following:
- Omni Plastics OmniLon™ 6 PA6 IM20 Unfilled/ Impact Modified Nylon
- NCMT NanoPAC™ S212 High Performance Polypropylene Nanocomposite
- Resinlab® SEC1244 Silver Filled Epoxy Adhesive
- Techmer ES Electrablend® PC SS10 FR BK 10% Stainless Steel Filled
- Teknor Apex Sinpolene TPP2010 Polypropylene
- A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66
- UBE UBESTA® 3030U Nylon 12 (After Zinc chloride aq. for 1000 hours)
- ExxonMobil Santoprene® 101-55W255 Thermoplastic Vulcanizate
- Beijing Chemical Industry KAIFA® 301-G10 PBT Resin
Copyright © lookpolymers.com All Rights Reserved