Amity Thermosets ATS 134 Phenolic Molding Inorganic, graphite Filler, Compression Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic
Manufacturer	Amity Thermosets
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Amity Thermosets ATS 134 Phenolic Molding Inorganic, graphite Filler, Compression Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Characteristics: Low coefficient of frictionSelf lubricating ( graphite modified )Good thermal conductivityGood glide propertiesNot suitable for electrical applicationColor- black gray Soft/medium flow Applications:Pump partsGas meter parts Carriers for grinding wheels , etc. Information provided by Amity Thermosets Limited

Physical Properties	Metric	English	Comments
Density	1.60 - 1.70 g/cc	0.0578 - 0.0614 lb/in³	Molding; IS 867-1963
Apparent Bulk Density	0.750 - 0.850 g/cc	0.0271 - 0.0307 lb/in³	IS 867-1963
Water Absorption	0.10 - 0.15 %	0.10 - 0.15 %	IS 13411-1993
Linear Mold Shrinkage	0.0020 - 0.0035 cm/cm	0.0020 - 0.0035 in/in	IS 13411-1992

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	46.0 - 56.0 MPa	6670 - 8120 psi	5 mm/min.; IS 867-1963
Shear Strength	60.0 - 65.0 MPa	8700 - 9430 psi	IS 867-1963
Izod Impact, Notched	0.200 - 0.300 J/cm	0.375 - 0.562 ft-lb/in	IS 13411-1992

Processing Properties	Metric	English	Comments
Mold Temperature	160 - 170 °C	320 - 338 °F
Injection Pressure	15.68 - 34.3 MPa	2274 - 4970 psi	Mold Pressure
Cure Time	1.00 - 1.17 min	0.0167 - 0.0194 hour	per mm
Shelf Life	12.0 Month	12.0 Month	10-25°C

Users viewing this material also viewed the following: