Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Amity Thermosets ATO 156 Phenolic Molding Glass Filler, Compression Molded

Category Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic
Manufacturer Amity Thermosets
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Amity Thermosets ATO 156 Phenolic Molding Glass Filler, Compression Molded.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Characteristics:High electrical insulationHigh mechanical strengthDimensional stabilityLow water absorptionColor-black Medium flow Applications: High electric insulation componentsHigh voltage switch partsCross barsIron heat shieldCommutatorsVacuum cleaner partsAutomotive parts ( which ought to withstand thermal shocks )Wind Screen wiper partsWashing machine parts ( higher quality )Thermally and mechanically highly stressed partsInsulating flangesPulleysHigh quality castor wheelsPump housingElectric motor end shield , etc.Information provided by Amity Thermosets Limited
Physical Properties Metric English Comments
Density 1.70 - 1.76 g/cc
0.0614 - 0.0636 lb/in³
Molding; IS 867-1963
Apparent Bulk Density 0.750 - 0.850 g/cc
0.0271 - 0.0307 lb/in³
IS 867-1963
Water Absorption 0.15 - 0.20 %
0.15 - 0.20 %
IS 13411-1993
Linear Mold Shrinkage 0.0025 - 0.0040 cm/cm
0.0025 - 0.0040 in/in
IS 13411-1992
Mechanical Properties Metric English Comments
Tensile Strength at Break 53.0 - 60.0 MPa
7690 - 8700 psi
5 mm/min.; IS 867-1963
Shear Strength 75.0 - 80.0 MPa
10900 - 11600 psi
IS 867-1963
Izod Impact, Notched 0.400 - 0.500 J/cm
0.749 - 0.937 ft-lb/in
IS 13411-1992
Electrical Properties Metric English Comments
Volume Resistivity 3.2e+11 - 3.2e+12 ohm-cm
3.2e+11 - 3.2e+12 ohm-cm
IS 3396-1979
Surface Resistance 1.00e+11 - 1.00e+12 ohm
1.00e+11 - 1.00e+12 ohm
IS 3396-1979
Dielectric Strength >= 9.00 kV/mm

@Temperature 90.0 °C
>= 229 kV/in

@Temperature 194 °F
IS 2584-1963
Processing Properties Metric English Comments
Mold Temperature 160 - 180 °C
320 - 356 °F
Injection Pressure 15.68 - 34.3 MPa
2274 - 4970 psi
Mold Pressure
Cure Time 0.833 - 1.00 min
0.0139 - 0.0167 hour
per mm
Shelf Life 12.0 Month
12.0 Month
10-25°C
Copyright © lookpolymers.com All Rights Reserved