POLYMER SEARCH

Alpase M-1™ Aluminum Mold Plate

Category	Metal , Nonferrous Metal , Aluminum Alloy , Aluminum Casting Alloy
Manufacturer	Alpase
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Alpase M-1™ Aluminum Mold Plate.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

M-1™ features and benefits include: Dimensional stability, fully weldable, anodizable, consistent hardness - regardless of size, can be nickel plated, good machinability, no heat treatment required, cost effective.Applications: Used for mold applications such as injection molding, blow molding, structural foam molding, RIM and RTM molding, and rubber molds.Sizes: Thickness 1 -30 inches; Width up to 88 inches; Length up to 195 inches. Data provided by Alpase.

Physical Properties	Metric	English	Comments
Density	2.80 g/cc	0.101 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	85	85
Tensile Strength, Ultimate	296 MPa	42900 psi	Typical
Tensile Strength, Yield	207 MPa	30000 psi	Typical
Elongation at Break	7 - 9 %	7 - 9 %	Typical
Modulus of Elasticity	74.5 GPa	10800 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	23.2 µm/m-°C @Temperature 20.0 - 100 °C	12.9 µin/in-°F @Temperature 68.0 - 212 °F
Thermal Conductivity	159 W/m-K	1100 BTU-in/hr-ft²-°F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	92.85 - 94.85 %	92.85 - 94.85 %	as balance
Copper, Cu	2.8 - 3.2 %	2.8 - 3.2 %
Iron, Fe	0.70 - 1.2 %	0.70 - 1.2 %
Magnesium, Mg	0.90 - 1.3 %	0.90 - 1.3 %
Nickel, Ni	0.70 - 1.2 %	0.70 - 1.2 %
Silicon, Si	0.050 - 0.20 %	0.050 - 0.20 %
Titanium, Ti	<= 0.050 %	<= 0.050 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.00000440 ohm-cm	0.00000440 ohm-cm

Descriptive Properties	Value	Comments
Microstructure	Vacuum Tight

Users viewing this material also viewed the following: