- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- Addiplast Addilene H 555 Y7 Polypropylene Homopolymer
Addiplast Addilene H 555 Y7 Polypropylene Homopolymer
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | Addiplast |
| Trade Name | Addilene |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Addiplast Addilene H 555 Y7 Polypropylene Homopolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Good surface appearance, high temperature resistanceInformation provided by Addiplast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183/A |
| Melt Flow | 20 g/10 min | 20 g/10 min | ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 75 | 75 | ISO 868 |
| Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO R 527 |
| Tensile Strength, Yield | 28.0 MPa | 4060 psi | ISO R 527 |
| Elongation at Yield | >= 100 % | >= 100 % | ISO R 527 |
| Modulus of Elasticity | 2.10 GPa | 305 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 5.50 kJ/m² | 2.62 ft-lb/in² | ISO 180/1A |
| Charpy Impact Unnotched | NB | NB | ISO 179/IeU |
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179/IeA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 165 - 168 °C | 329 - 334 °F | ISO 3146/C2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75-2/AF |
| Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | CEI 60093 |
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | CEI 60093 |
| Comparative Tracking Index | >= 600 V | >= 600 V | CEI 60112/Solution A |
Users viewing this material also viewed the following:
- NIZHNEKAMSKNEFTEKHIM PE 4148B (484H2) High Density Polyethylene
- Kazanorgsintez 107-276 Low Density Polyethylene Composition with Improved Processibility
- Hyosung Topilene C600M2 PP
- GRECO ISOTHANE 1095AE Poly(adipate)ester TPUÂ Resin
- Iran Petrochemical (PCC) Arak EX3 HDPE
- Polyram RamTough RZ225 Polycarbonate, Injection Molding
- Chesterton 725 Nickel Anti-Seize Compound
- Radici Heraflex® A 35-13-40 TPS-SEBS Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved