- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Glass Filled, Molded
- Adamas Adalon® 205 PTFE, 15/5% Glass/MoS2 Filled
Adamas Adalon® 205 PTFE, 15/5% Glass/MoS2 Filled
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Glass Filled, Molded |
| Manufacturer | Adamas |
| Trade Name | Adalon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adamas Adalon® 205 PTFE, 15/5% Glass/MoS2 Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Adamas, HPM
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.26 - 2.28 g/cc | 2.26 - 2.28 g/cc | ASTM D792 |
| Deformation | 5.3 - 6.5 % | 5.3 - 6.5 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 10 - 12 % | 10 - 12 % | ASTM D621 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 - 59 | 55 - 59 | ASTM D2240 |
| Ball Indentation Hardness | 42.0 - 46.0 MPa | 6090 - 6670 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 18.0 MPa | >= 2610 psi | ASTM D4894 |
| Elongation at Break | >= 200 % | >= 200 % | ASTM D4894 |
| Coefficient of Friction, Dynamic | 0.080 - 0.12 | 0.080 - 0.12 | ASTM D1894 |
| Coefficient of Friction, Static | 0.10 - 0.15 | 0.10 - 0.15 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -20.0 °C | -4.00 °F | DSC |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | ASTM D257 |
Users viewing this material also viewed the following:
- Multibase Multi-Pro® 4518 CUW Polypropylene
- Gharda Chemicals GATONE™ PEEK, 30% Glass Reinforced (discontinued **)
- Hybrid Plastics FireQuench® PM 1287 Resin
- LTL Color Compounds ColorRxâ„¢ ABS-0501A Antimicrobial ABS
- Lubrizol Advanced Materials Pearlthane® ECO D12T55D Thermoplastic Polyurethane
- Specialty Materials Hy-Bor Boron/Graphite Hybrid Prepreg Tape
- UBE 5034MT2 Nylon 6/66 Monofilament (Drawing Ratio=6)
- Epoxy Technology EPO-TEK® 360ST High Temperature Epoxy
- Techmer ES Luriblend® HTN 01400 BK
Copyright © lookpolymers.com All Rights Reserved