- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Blow Molding Grade
- Aclo Accucomp Polypropylene CPO425BAV Automotive Approved Copolymer Expandable Grade
Aclo Accucomp Polypropylene CPO425BAV Automotive Approved Copolymer Expandable Grade
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Blow Molding Grade |
| Manufacturer | Aclo Compounders |
| Trade Name | Accucomp |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aclo Accucomp Polypropylene CPO425BAV Automotive Approved Copolymer Expandable Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.905 g/cc | 0.0327 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.016 cm/cm | 0.016 in/in | MD; ASTM D955 |
| Melt Flow | 7.0 g/10 min | 7.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 90 | 90 | ASTM D785 |
| Tensile Strength, Yield | 25.0 MPa | 3630 psi | ASTM D638 |
| Elongation at Break | 50 % | 50 % | ASTM D638 |
| Tensile Modulus | 1.20 GPa | 174 ksi | ASTM D638 |
| Flexural Strength | 34.5 MPa | 5000 psi | ASTM D790 |
| Flexural Modulus | 1.20 GPa | 174 ksi | ASTM D790 |
| Izod Impact, Notched | 0.427 J/cm | 0.800 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 110 °C | 230 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 57.8 °C | 136 °F | |
| Flame Spread | 25 mm/min | 0.98 in/min | FMVSS |
Users viewing this material also viewed the following:
- Nye Lubricants 825-1 (FG) Synthetic Oil
- RheTech Products T20P250-731UV 20% Talc Reinforced Polypropylene Copolymer, UV Stabilized, AS20698 Black
- Palm Labs Adhesives Turbo Fuse Series 160SI Surface Insensitive (1000 Viscosity) Rapid Bonding Adhesive
- Westlake Mxsten CV CV77515-F Plastomer (discontinued **)
- PolyMirae Moplen EP301C Pipe Extrusion/ Sheet/ Blown Film Grade Polypropylene
- Techmer ES HiFill® PA6 HS L Colors Heat Stabilized
- Hexcel® HexPly® 171/174/176 120°C Curing Epoxy Matrix
- DuPont Performance Polymers Delrin® 100ST NC010 Acetal (POM) (Unverified Data**)
- Arlon 51576S020 0.020" (0.508 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- 3M 8153LE Adhesive Transfer Tapes with Adhesive 300LSE
Copyright © lookpolymers.com All Rights Reserved