AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition H 1025

Category	Metal , Ferrous Metal , Martensitic , Stainless Steel , Precipitation Hardening Stainless
Manufacturer	AK Steel
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition H 1025.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AK Steel 17-4 PH® provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time, low-temperature heat treatments minimize distortion and scaling. This alloy is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. The material supplied from the mill is in Condition A. After fabrication eight standard heat treatments have been developed to provide a wide range of properties.Information provided by AK Steel

Physical Properties	Metric	English	Comments
Density	7.80 g/cc	0.282 lb/in³	Typical

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell C	38	38
Tensile Strength, Ultimate	1276 MPa	185100 psi
Tensile Strength, Yield	1172 MPa @Strain 0.200 %	170000 psi @Strain 0.200 %
Elongation at Break	8.0 %	8.0 %	in 2 inches

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.070 %	<= 0.070 %
Chromium, Cr	15 - 17.5 %	15 - 17.5 %
Copper, Cu	3.0 - 5.0 %	3.0 - 5.0 %
Iron, Fe	69.91 - 78.85 %	69.91 - 78.85 %	As Remainder
Manganese, Mn	<= 1.0 %	<= 1.0 %
Nb + Ta	0.15 - 0.45 %	0.15 - 0.45 %
Nickel, Ni	3.0 - 5.0 %	3.0 - 5.0 %
Phosphorous, P	<= 0.040 %	<= 0.040 %
Silicon, Si	<= 1.0 %	<= 1.0 %
Sulfur, S	<= 0.030 %	<= 0.030 %

Users viewing this material also viewed the following: