- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene with 40% Talc Filler
- A.D. Compound Adene NTQA Homopolymer 40% Talc Filled Polypropylene
A.D. Compound Adene NTQA Homopolymer 40% Talc Filled Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 40% Talc Filler |
| Manufacturer | A.D. Compound |
| Trade Name | Adene |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A.D. Compound Adene NTQA Homopolymer 40% Talc Filled Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by A.D. Compound
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.23 g/cc | 0.0444 lb/in³ | ISO 1183 |
| Filler Content | 40 % | 40 % | ISO 3451 / 1 |
| Melt Index of Compound | 18 g/10 min @Load 2.16 kg, Temperature 230 °C |
18 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 84 | 84 | ISO 868 |
| Tensile Strength, Yield | 20.0 MPa | 2900 psi | ISO 527 |
| Elongation at Break | 10 % | 10 % | ISO 527 |
| Elongation at Yield | 5.0 % | 5.0 % | ISO 527 |
| Flexural Modulus | 2.60 GPa | 377 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 2.90 kJ/m² | 1.38 ft-lb/in² | ISO 180/1A |
| Izod Impact, Unnotched (ISO) | 9.00 kJ/m² | 4.28 ft-lb/in² | ISO 180/1U |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75 |
| Vicat Softening Point | 97.0 °C | 207 °F | 49 N; ISO 306 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 79 T 20 PP/C reinforced with 20% mineral filler
- Pau Tai Unistab ECZ-81 Calcium-Zinc/Barium-Zinc
- SolVin 557RB Copolymer of Vinyl Chloride and Vinyl Acetate
- SABIC Innovative Plastics LNP THERMOCOMP LC00APXQ PEEK
- Teknor Apex Flexalloy® 9900-60 Polyvinyl Chloride Elastomer
- Polyram PlusTek PB841 Nylon 6 for Injection Molding, Impact Modified
- Cresset Powers Cress-Alon™ NF3020 2% Nano Clay Loaded, 3.0 r.v. Film Grade Nylon 6, Dry As Molded
- Chosun Refractories ASM-32 Air-Setting Mortar
- DuPont Teijin Films Melinex® ST730 Polyester Film
- Master Bond UV15X-6NONMED-2 Abrasion Resistant UV Curable Compound
Copyright © lookpolymers.com All Rights Reserved