3M 9461P Adhesive Transfer Tapes with Adhesive 100

Category	Polymer , Adhesive
Manufacturer	3M
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M 9461P Adhesive Transfer Tapes with Adhesive 100.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

These 3M™ Adhesive Transfer Tapes with 3M™ Adhesive 100 are designed for temperature exposure to 450°F (232°C) for short periods of time and/or solvent resistance. They have exceptional shear values even at elevated temperatures. They also offer low “outgassing” properties, which is an important consideration for the aerospace, automotive and electronic industriesInformation provided by 3M

Physical Properties	Metric	English	Comments
Thickness	29.5 microns	1.16 mil

Mechanical Properties	Metric	English	Comments
Peel Strength	0.1972 kN/m	1.125 pli	High Surface Energy Plastic (ABS), Ultimate bond, 90° peel, 12"/min., 2 mil aluminum; ASTM D3330
	0.394 kN/m	2.25 pli	High Surface Energy Plastic (ABS), 72 hr. dwell, 90° peel, 12"/min., 2 mil aluminum; ASTM D3330
	0.526 kN/m	3.00 pli	to Stainless Steel, 20 min dwell, 90° peel, 12"/min., 2 mil aluminum; ASTM D3330
	0.93128 kN/m	5.3125 pli	to Stainless Steel, 72 hr. dwell, 90° peel, 12"/min., 2 mil aluminum; ASTM D3330
	1.3038 kN/m	7.4375 pli	to Stainless Steel, Ultimate bond, 90° peel, 12"/min., 2 mil aluminum; ASTM D3330

Thermal Properties	Metric	English	Comments
CTE, linear	19.9 µm/m-°C @Temperature 125 - 175 °C	11.1 µin/in-°F @Temperature 257 - 347 °F	First heat; ASTM-D696
	58.4 µm/m-°C @Temperature 25.0 - 175 °C	32.4 µin/in-°F @Temperature 77.0 - 347 °F	Second heat; ASTM-D696
Thermal Conductivity	0.178 W/m-K @Temperature 51.0 °C	1.24 BTU-in/hr-ft²-°F @Temperature 124 °F	ASTM C518
	0.183 W/m-K @Temperature 71.0 °C	1.27 BTU-in/hr-ft²-°F @Temperature 160 °F	ASTM C518
	0.187 W/m-K @Temperature 101 °C	1.30 BTU-in/hr-ft²-°F @Temperature 214 °F	ASTM C518

Electrical Properties	Metric	English	Comments
Volume Resistivity	4.00e+15 ohm-cm	4.00e+15 ohm-cm
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm
Insulation Resistance	>= 9.40e+10 ohm	>= 9.40e+10 ohm	Cycle #410, test voltage = 100 VDC, MIL-I-46058C
	>= 1.50e+11 ohm	>= 1.50e+11 ohm	Cycle #4, test voltage = 100 VDC, MIL-I-46058C
	>= 9.70e+12 ohm	>= 9.70e+12 ohm	24 hr after moisture resistance
	>= 1.00e+15 ohm	>= 1.00e+15 ohm	Before moisture resistance, test voltage = 100 VDC, MIL-I-46058C
Dielectric Constant	2.92 @Frequency 1000 Hz	2.92 @Frequency 1000 Hz	ASTM D-150-92
Dielectric Strength	43.3 kV/mm	1100 kV/in	500 vac, rms. [60 Hz]/sec; ASTM D149-92
Dissipation Factor	0.0025 @Frequency 1000 Hz	0.0025 @Frequency 1000 Hz

Processing Properties	Metric	English	Comments
Shelf Life	24.0 Month	24.0 Month

Descriptive Properties	Value	Comments
Liner	55# Densified Kraft - 3.2 mils thick with printed liner

Users viewing this material also viewed the following: