Processing Properties | Metric | English | Comments |
---|---|---|---|
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Plastcom SLOVAMID 6 GF 50 LS PA6, 50% glass fibre, light stability FeaturesPA 6 for injection moulding, chemically strengthened with 50% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Plastcom SLOVAMID 6 GF 60 000/1M PA6 reinforced with 60% glass fibre Features: PA 6 for injection moulding, chemically strengthened with 60% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-go.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Plastcom SLOVAMID 6 NG GF 45 SGF PA6, improved strength, light stability FeaturesPA 6 for injection moulding, chemically strengthened with 45 % of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-goo.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs N20 GF17 ABS, Glass Fiber-Reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs T00 ABS, Transparent Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs X00 ABS, Extrusion Grade Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYasa 2410F High Flow ASA Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYblend 85FS GF10 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 50.0 - 150 MPa | 7250 - 21800 psi | |
Solvay Specialty Polymers Primef® 7002 Polyphenylene Sulfide (PPS), 65% GlassMineral
(discontinued **) Primef 7002 is a 65% mineral/glass fiber reinforced polyphenylene sulfide (PPS). This grade offers higher fluidity than Primef 7010 (also 65% mineral/glass fiber), but with somewhat lower mechanical.. |
|||
Injection Pressure | 80.0 - 150 MPa | 11600 - 21800 psi | |
Plastcom SLOVAMID 6 LI PA6, improved strength FeaturesPA 6 with the content of thermoplastic kaoutchouc. Impacted, for mouldings with high toughness either at minus temperatures, suitable for external use, eg. ski shoes, sports and safety helme.. |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs F00 GF15 ABS, Glass Fiber-Reinforced Information provided by Polykemi AB |
|||
Injection Pressure | 90.0 - 150 MPa | 13100 - 21800 psi | |
Polykemi AB POLYabs HH0 ABS, Extra Heat Resistance Information provided by Polykemi AB |