Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 14.5 µm/m-°C @Temperature 0.000 - 300 °C |
8.06 µin/in-°F @Temperature 32.0 - 572 °F |
|
Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, 12.7 mm (1/2 in.) thick plate Machined with tungsten-carbide tools. Inherent wear resistance, resistant to the wearing effects of hard, sharp particles such as in screw conveyors, rock crushing rollers, tile-making machines, and.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 0.000 - 300 °C |
8.06 µin/in-°F @Temperature 32.0 - 572 °F |
|
Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, air cooled, 1.0 mm thick sheet Machined with tungsten-carbide tools. Inherent wear resistance, resistant to the wearing effects of hard, sharp particles such as in screw conveyors, rock crushing rollers, tile-making machines, and.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 0.000 - 300 °C |
8.06 µin/in-°F @Temperature 32.0 - 572 °F |
|
Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, air cooled, 4.8 mm thick sheet Machined with tungsten-carbide tools. Inherent wear resistance, resistant to the wearing effects of hard, sharp particles such as in screw conveyors, rock crushing rollers, tile-making machines, and.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 0.000 - 300 °C |
8.06 µin/in-°F @Temperature 32.0 - 572 °F |
|
Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, air cooled, 7.9 mm thick plate Machined with tungsten-carbide tools. Inherent wear resistance, resistant to the wearing effects of hard, sharp particles such as in screw conveyors, rock crushing rollers, tile-making machines, and.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 20.0 - 100 °C |
8.06 µin/in-°F @Temperature 68.0 - 212 °F |
|
Industeel SIRIUS 309 23% Cr - 13% Ni Heat Resistant Stainless Steel Description: CLI SIRIUS 309 grade is a fully austenitic stainless steel containing 23% Cr, and 13% Ni additions. The alloy is well known for its multi-purpose high temperature corrosion resistance b.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 20% cold reduction, 3.2 mm thick sheet Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 20% cold reduction, 3.2 mm thick sheet, 1120°C for 5 minutes Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 30% cold reduction, 3.2 mm thick sheet Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 30% cold reduction, 3.2 mm thick sheet, 1065°C for 5 minutes Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 30% cold reduction, 3.2 mm thick sheet, 1120°C for 5 minutes Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 40% cold reduction, 3.2 mm thick sheet Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, hot rolled and 1175°C solution annealed plate Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, plate at RT after 0 hours at 870°C (1600°F) Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, plate at RT after 8000 hours at 650°C (1200°F) Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 26.0 - 427 °C |
8.06 µin/in-°F @Temperature 78.8 - 801 °F |
|
Haynes Ultimet® alloy, 6.3-38.1 mm plate Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 26.0 - 427 °C |
8.06 µin/in-°F @Temperature 78.8 - 801 °F |
|
Haynes Ultimet® alloy, aged 1000 hours at 204°C (400°F) Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 26.0 - 427 °C |
8.06 µin/in-°F @Temperature 78.8 - 801 °F |
|
Haynes Ultimet® alloy, aged 1000 hours at 871°C (1600°F) Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 26.0 - 427 °C |
8.06 µin/in-°F @Temperature 78.8 - 801 °F |
|
Haynes Ultimet® alloy, plate, GMAW weld (short) Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 500 °C |
8.06 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 188 alloy, 10% cold reduction, 3.2 mm thick sheet, 1120°C for 5 minutes Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 900 °C |
8.06 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 242® alloy, after 4000 hours exposure at 650°C (1200°F) Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 900 °C |
8.06 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 242® alloy, after 8000 hours exposure at 650°C (1200°F) Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 900 °C |
8.06 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 242® alloy, cold reduced sheet, annealed Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.5 µm/m-°C @Temperature 25.0 - 900 °C |
8.06 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 242® alloy, cold reduced sheet, annealed, 40% cold work, aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |