Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 95.0 µm/m-°C @Temperature 23.0 - 100 °C |
52.8 µin/in-°F @Temperature 73.4 - 212 °F |
|
Murtfeldt Murylon® A Nylon 66 This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than.. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
52.8 µin/in-°F @Temperature 73.4 - 140 °F |
|
Murtfeldt Murytal® ESD Acetal Copolymer, Conductive Additives make this material conductive. The mechanical properties of the material are retained almost in their entirety. Special Properties:• High rigidity• Excellent ability to regain its form•.. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
52.8 µin/in-°F @Temperature 73.4 - 140 °F |
|
Murtfeldt Murytal® H Acetal Homopolymer In addition to the excellent properties of Murytal® C, Murytal® H is stronger and more rigid with a lower expansion coefficient.Special Properties:• High rigidity• Excellent ability to regain it.. |
|||
CTE, linear | 95.0 - 110 µm/m-°C @Temperature 25.0 - 200 °C |
52.8 - 61.1 µin/in-°F @Temperature 77.0 - 392 °F |
ASTM D696 |
Polikim EFALON® B-40 PTFE, 40% Bronze Filled Bronze-filled Efalon® (PTFE) has better heat insulation, less thermal expansion, higher wear resistance properties and less deformation under load compared to virgin Efalon®. Applications: bearing.. |
|||
CTE, linear | 95.0 - 100 µm/m-°C @Temperature 25.0 - 100 °C |
52.8 - 55.6 µin/in-°F @Temperature 77.0 - 212 °F |
ASTM D696 |
Polikim EFALON® K-25 PTFE, 25% Carbon Filled K25 and K35 have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon® (PTFE). Applications: Bearings, piston rings, gaskets, seal rings... |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 160 - 250 °C |
52.8 µin/in-°F @Temperature 320 - 482 °F |
TD; ASTM E831 |
Solvay Specialty Polymers Amodel® A-1115 HS Polyphthalamide (PPA) Resin, 15% Glass Reinforced, Dry As Molded
AMODEL A-1115 HS resin is a 15% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits a high deflection temperature, high flexural modulus, and high tensile strength. Excellent cre.. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 160 - 250 °C |
52.8 µin/in-°F @Temperature 320 - 482 °F |
TD; ASTM E831 |
Solvay Specialty Polymers Amodel® A-1240 HS Polyphthalamide (PPA) Resin, 40% Mineral Reinforced, Dry As Molded
&nbs AMODEL A-1240 polyphthalamide (PPA) resins are 40% mineral filled resins that have high deflection temperature, flexural modulus, and tensile strength. They mold with low warpage, have excellent di.. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature >=162 °C |
52.8 µin/in-°F @Temperature >=324 °F |
Average above Tg; ISO 11359 |
Victrex® ST™ ST45CA30 PolyEtherKetoneEtherKetoneKetone, 30% Carbon Fibre Reinforced Product Description:High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherKetoneEtherKetoneKetone (PEKEKK), semi crystalline, granules for injection moulding, standard flow, .. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 200 - 300 °C |
52.8 µin/in-°F @Temperature 392 - 572 °F |
ASTM E831 |
3M Dyneon™ TF 4103 PTFE 15% Glass Fiber Filled
(discontinued **) Type II PTFE. Applications include valve seats, bearings, seals/gaskets, moldings, piston rings.Data provided by Dyneon. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 23.9 - 100 °C |
52.8 µin/in-°F @Temperature 75.0 - 212 °F |
|
Tra-Con Tra-Bond Ablebond 724-1 Polyurethane Adhesive Ablebond 724-1 premixed and frozen, polyurethane adhesive is designed for good adhesion, providing strong resilient bonds to a wide variety of substrates.Information provided by Tra-Con Inc. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 30.0 - 50.0 °C |
52.8 µin/in-°F @Temperature 86.0 - 122 °F |
|
3D Systems Accura® Xtreme White 200 Plastic Ultra tough white plastic to replace CNC Machined polypropylene and ABS articles FeaturesExceptionally tough and durableUsed for challenging functional assembliesUsed for snap fit assembl.. |
|||
CTE, linear | 95.0 µm/m-°C @Temperature 20.0 °C |
52.8 µin/in-°F @Temperature 68.0 °F |
Cured property; alpha 2; Perkin Elmer TMS-2 |
Aptek 6550-A/B Epoxy Encapsulant High thermal conductivity, microelectronic grade blob-top encapsulant. Ultra high purity. Excellent heat and moisture protection for sensitive chips/circuitry. Premixed frozen syringes available for.. |