- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 135 °C
Polymer Property : Melting Point = 135 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 135 - 137 °C | 275 - 279 °F | DSC ISO 3146 |
| Okulen® 1000 PE-UHMW, MoS2 -Moly- OKULEN® 1000 is an ultra high molecular low pressure polyethylene with a molecular weight of < 3.5 g/mol. It has great wear resistance, high impact strength, and excellent sliding properties ideal .. |
|||
| Melting Point | 135 - 137 °C | 275 - 279 °F | ISO 3146 |
| Okulen® 2000 PE-UHMW, AB OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
| Melting Point | 135 °C | 275 °F | Internal method |
| Polimeri Europa Eraclene® BC 82 High Density Polyethylene - Blow Molding Eraclene BC 82 is a high density polyethylene resin (HDPE) with antioxidants, suitable for blow molding application. It is especially recommended for the production of containers up to 20 liters.Er.. |
|||
| Melting Point | 135 °C | 275 °F | Internal method |
| Polimeri Europa Eraclene® FC 82 High Density Polyethylene - Blown Film Extrusion Eraclene FC 82 is a high density polyethylene resin (HDPE), hexene copolymer, with antioxidants, suitable for blown film extrusion.Its broad molecular weight distribution and density successfully co.. |
|||
| Melting Point | 135 °C | 275 °F | Internal method |
| Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding Eraclene MR 80 is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application. Eraclene MR 80 shows a good balance between processability and mechanical p.. |
|||
| Melting Point | 135 °C | 275 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Quadrant EPP TIVAR® 1000 antistatic PE-UHMW + carbon black (ISO Data) By incorporating an effective carbon black grade, TIVAR 1000 antistatic offers the electrostatic dissipative properties often required for PE-UHMW components operating at high line speeds and convey.. |
|||
| Melting Point | 135 °C | 275 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP TIVAR® 88 UHMW-PE, Premium Glass Filled, Crosslinked Lining Material (ASTM Product Data Sheet) Promotes reliable, steady bulk material flow Abrasion-, chemical- and corrosion-resistant Low coefficient of friction No moisture absorption Reduces or eliminates arching, ratholing and erractic fl.. |
|||
| Melting Point | 135 °C | 275 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP TIVAR® CleanStat™ FDA, USDA, 3-A Dairy, Electro Static Dissipative UHMW-PE (ASTM Product Data Sheet) |
|||
| Melting Point | 135 °C | 275 °F | Crystalline Peak; ASTM D3418 |
| Quadrant EPP TIVAR® ECO UHMW-PE, Recycled (ASTM Product Data Sheet) |
|||
| Melting Point | 135 °C | 275 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP TIVAR® SuperPlus UHMW-PE, Glass-filled Cross-linked & Heat Stabilized Extreme Wear Resistant (ASTM Product Data Sheet) |
|||
| Melting Point | 135 °C | 275 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Quadrant EPP TIVAR® TECH PE-UHMW + MoS2 (ISO Data) This PE-UHMW grade with extremely high degree of polymerisation contains molybdenum disulphide, resulting in a material with improved wear resistance and sliding properties over TIVAR 1000. |
|||
| Melting Point | 135 - 138 °C | 275 - 280 °F | ASTM D789 |
| Rochling Engineered Plastics Polystone® XL Cross linked (UHMW-PE) Polystone® M is a highly versatile polymer that features: Low coefficient of friction Excellent abrasion resistance High-impact strength Chemical resistance Complies with FDA regulations under the .. |
|||
| Melting Point | 135 °C | 275 °F | |
| Mitsui Fybrel® E 790 Polyolefin Synthetic Pulp, Wet Processes
(discontinued **) Fybrel® (Polyolefin Synthetic Pulp) is a highly fibrillated fiber similar to wood pulp. There are three types available: Fybrel® E and Fybrel® UL, which are both made from polyethylene, and Type .. |
|||
| Melting Point | 135 °C | 275 °F | |
| Mitsui Fybrel® E 400 Polyolefin Synthetic Pulp, Wet Processes
(discontinued **) Fybrel® (Polyolefin Synthetic Pulp) is a highly fibrillated fiber similar to wood pulp. There are three types available: Fybrel® E and Fybrel® UL, which are both made from polyethylene, and Type .. |
|||
| Melting Point | 135 °C | 275 °F | |
| Mitsui Fybrel® E 620 Polyolefin Synthetic Pulp, Wet Processes
(discontinued **) Fybrel® (Polyolefin Synthetic Pulp) is a highly fibrillated fiber similar to wood pulp. There are three types available: Fybrel® E and Fybrel® UL, which are both made from polyethylene, and Type .. |
|||
| Melting Point | 135 °C | 275 °F | Crystallinity by DSC; ASTM D 3418 |
| Solvay Specialty Polymers Solef® 21508 PVDF Copolymer
(discontinued **) Key features of this grade: High Elongation, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General information about SOLEF® PVDF: SOLEF® P.. |
|||
| Melting Point | 135 - 218 °C | 275 - 424 °F | Average value: 193 °C Grade Count:7 |
| Overview of materials for Nylon 612, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Impact Modified". Each property range of values reported is minimum and maximum values of app.. |
|||
| Melting Point | 135 °C | 275 °F | |
| LyondellBasell Lupolen® 6031 M HDPE, Injection Molding Grade Easy flow, injection molding grade for fruit crates, tote boxes and bottle crates, cartridges, protective headgear, buckets, dishes, cartridges for adhesive film canisters, aerosol lids, child seats.. |
|||
| Melting Point | 135 °C | 275 °F | Eutectic |
| Indium Corp. Indalloy 75 Bismuth-Tin Solder Alloy Information Provided by Indium Corporation |
|||
| Melting Point | 135 °C | 275 °F | 10°C/min; ASTM D3418 |
| LG Chemical SEETEC PF150 HDPE Features: Characteristics: Good impact & tear strength, High speed & superior heat sealing propertiesAdditives: Anti-oxidants, LubricantsApplication: Shopping bags, Thin films, Trash bags, Multiwall.. |
|||
| Melting Point | 135 °C | 275 °F | MTM 15902 |
| LyondellBasell Adsylâ„¢ 5 X 37 F Polyolefin Description: Adsylâ„¢ 5 X 37 F is a new thermoplastic polyolefin which has been designed as a BOPP sealing layer material with exceptionally low sealing temperature. It features a relatively high.. |
|||
| Melting Point | 135 - 145 °C | 275 - 293 °F | MQSA 111 |
| Lubrizol Advanced Materials PEARLCOAT® Activa D118K Thermoplastic Polyurethane Elastomer PEARLCOAT® Activa D118K is a polycaprolactone copolyester based thermoplastic polyurethane of low hardness, supplied in form of natural pellets. This product gives an inherent “low gloss asp.. |
|||
| Melting Point | 135 °C | 275 °F | |
| Techmer ES HiFill® HDPE TM20 20% Talc Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 20% Filler by WeightInformation provided by TP Composites, Inc. |
|||
| Melting Point | 135 °C | 275 °F | Kofler |
| Lubrizol ESTANE® 58245 Ether Based Thermoplastic Polyurethane Features: High moisture vapor transmission. Good low temperature properties and elasticity.Uses: Blown and flat die/cast film extrusion.Available in Americas, Europe, Middle East, Africa, India and .. |
|||
| Melting Point | 135 °C | 275 °F | Equate Test Method |
| Equate EPDA-5040 HDPE Non-Pressure Gravity Pipe Resin EPDA-5040 is a high molecular weight high density polyethylene copolymer resin designed for non-pressure gravity pipe applications. It has a good balance of flexibility, ductility, stiffness and tou.. |
|||
| Melting Point | 135 °C | 275 °F | ISO 11357 |
| Arkema Group Pebax® Rnew 35R53 SP 01 Polyether Block Amide (PEBA) Polyether block amide Pebax® 35R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV.. |
|||
| Melting Point | 135 °C | 275 °F | 10K/min; ISO 3146 |
| CENTROPLAST CENTROLEN PE-UHMW Ultra-high molecular weight polyethylene This plastic is a low density, easily machined material that can be welded and has a low sliding friction with high impact resistance. Applications include glide strips, pump components, and wearin.. |
|||
| Melting Point | 135 - 138 °C | 275 - 280 °F | ASTM D789 |
| Rochling Engineered Plastics Polystone® Reprocessed (UHMW-PE) Polystone® M is a highly versatile polymer that features: Low coefficient of friction Excellent abrasion resistance High-impact strength Chemical resistance Complies with FDA regulations under the .. |
|||
Copyright © lookpolymers.com All Rights Reserved