Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 87.0 °C | 189 °F | |
Polycasa Acryl® KR 2014/1 Acrylic, Impact Grade High-impact grade with good mechanical properties; applications include drawing instruments, scales, containers, display stands; good processing viscosity, especially suitable for coextrusion. Extr.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Geloy XTWE265 ASA Highly weatherable Geloy ASA profile extrusion grade for processes with simple or no calibration hardware.This data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Chevron Phillips 1008.5 Injection Molding Resin
(discontinued **) Resin Type: Homopolymer; ASTM D 4976 Classification: PE 112, A 14200Characteristics: Excellent Flexibility, Excellent Flow, Good Warping Resistance, Moderate Mold Release, Moderate ESCRApplications:.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Huntsman PE1504 EVA Film Extrusion
(discontinued **) 5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50°C/hr; 50N |
Arkema Group Oroglas® HFI-7 Acrylic
(discontinued **) OROGLAS HFI-7 is a medium impact grade that in addition to the improvement in impact resistance provides superior flow which contribute to reduce the cycle time and improve demolding.Key features :.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Chevron Phillips K-Resin® KR99HG Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: This SBC is easily processed by injection molding. Molded parts provide excellent part detail on fast production cycles. Molded parts have excellent c.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
LyondellBasell Purell® PE1840H Low Density Polyethylene, Blown Film, Injection Molding, Blow Fill & Seal, Extrusion Blow Molding Purell PE 1840 H is a low density polyethylene with good flexibility and is delivered in pellet form. It is designed for small blow molding but can also be used in film applications and injection mo.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | resin; ASTM D1525 |
Lotte Chemical Titan TITANLENE® LDC800YY Low density polyethylene resin LDC800YY is a low density polyethylene resin for extrusion coating and is a barefoot grade. LDC800YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 2.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® TX-0520 TRABS, Unreinforced Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® VE-0852 ABS, Unreinforced FR Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | Rate "A" Loading 1 (50 degC/h 10N); ASTM Test |
Styrolution Terlux® 2812 TR MABS Terlux 2812 TR is a transparent grade of MABS for injection molding with high flowability.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® VE-0855YS ABS, Unreinforced FR Flame-retardant ABS that can be used in the exterior of monitorsInformation provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 87.0 - 95.0 °C | 189 - 203 °F | Kofler Heating Stage |
SK Chemicals SKYTHANE® UB410 Powder Coating Description: SK Chemicals has supplied Thermoplastic Polyurethane Elastomer (TPU) under the name of SKYTHANE. UB series are used for adhesives and coating applications such as binder for magnetic ta.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50N-50°C per hour; ISO 306 |
Total PPH 7059 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 7059 is homopolymer.ApplicationATOFINA Polypropylene PPH 7059 is intended for extrusion of staple fibers for non-woven applications. It exhibits excellent spinning propert.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50N-50°C per hour; ISO 306 |
Total PPH 7060 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 7060 is homopolymer.ApplicationATOFINA Polypropylene PPH 7060 is intended for the injection molding of packaging containers, toys, domestic appliances, garden furniture and.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50N-50°C per hour; ISO 306 |
Total PPH 7062 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 7062 is an antistatic homopolymer.ApplicationATOFINA Polypropylene PPH 7062 is intended for injection molding applications of boxes, closures and household articles. Inform.. |
|||
Vicat Softening Point | 87.0 °C @Load 5.10 kg |
189 °F @Load 11.2 lb |
50°C per hour; ISO 306B50 |
Total PS CPDS 801 Flame Retardant Polystyrene POLYSTYRENE (PS) COMPOUND (CPDS) 801 is a high impact brominated flame retardant polystyrene for use in injection molding and extrusion/thermoforming. PS CPDS 801 can be supplied in both natural an.. |
|||
Vicat Softening Point | 87.0 °C @Load 5.10 kg |
189 °F @Load 11.2 lb |
50°C per hour; ISO 306B50 |
Total PS CPDS 807 Flame Retardant Polystyrene POLYSTYRENE (PS) COMPOUND (CPDS) 807 is a high impact flame retardant polystyrene for use in HGW applications. PS CPDS 807 can be supplied in both natural and colored forms.Main Characteristics:DBD.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50N (T° increase = 5°C/h); ISO 306B50 |
Total PSI 7240 High Impact Polystyrene 7240 is a very high impact polystyrene for the extrusion industry. This grade has been designed to be diluted with crystal polystyrene (such as LACQRENE® 140, 1340 or 1540) at higher levels than c.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Eastman Tenite 307A4000018 Propionate Clear, Trsp Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosi.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Chevron Phillips K-Resin® KR03 Styrene-Butadiene Copolymer, Sheet Grade Styrene-Butadiene CopolymerCustomer Benefits: This SBC is easily processed by injection molding or sheet extrusion and molded parts give excellent part detail on fast production cycles. It can be t.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | JIS-K-6740 |
Denka VINYKON R2001 PVC, R grade for hard extrusion A PVC resin compound offering excellent physical properties and workability. A broad product lineup is available, including hard and soft grades, as well as those for extrusion and injection molding.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Braskem BC 818 LDPE Extrusion Coating Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Extrusion coating. Information provided by Braskem |
|||
Vicat Softening Point | 87.0 °C | 189 °F | |
BASF Polystyrol® 445 E WU Impact Grade Polystyrene (Europe) Easy flowing, heat-resistant, medium-impact, flame-retardant grade. Application example: electrical distribution boxes.Data was collected by ISO methods and provided by BASF. |
|||
Vicat Softening Point | 87.0 °C @Load 0.999 kg |
189 °F @Load 2.20 lb |
ASTM D1525 |
Arkema Group LOTADER® AX 8840 Copolymer Ethylene - Glycidyl Methacrylate LOTADER AX 8840 is a random copolymer of Ethylene and Glycidyl Methacrylate, polymerized under high pressure in an autoclave process. Due to the reactivity induced by the Glycidyl methacrylate, LOTA.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50°C/hr; 50N |
Arkema Group Evatane® 1005 VG 2 Ethylene Vinyl Acetate EVA copolymer made by high pressure tubular process. Applications Grade for strength films, sealable at low temperature with some hot tack. Examples: rigid bags, deep-freeze packaging, laminates, co.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 10N; ISO 306A50 |
Total Lacqrene® 4801
(discontinued **) LACQRENE® 4801 is an easy flowing, high impact polystyrene for injection molding. The very good processing characteristics of this grade allows for the production of thin articles with long flow p.. |
|||
Vicat Softening Point | 87.0 - 186 °C | 189 - 367 °F | Average value: 151 °C Grade Count:9 |
Overview of materials for Thermoplastic Polyurethane (TPUR), Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Polyurethane (TPUR), Glass Fiber Reinforced". Each property range of values reported is mi.. |
|||
Vicat Softening Point | 87.0 °C | 189 °F | 50 °C/h 50N; ISO 306 |
DSM Arnitel® CM622 TPC-ES 60 Shore D, Extrusion |
|||
Vicat Softening Point | 87.0 - 148 °C | 189 - 298 °F | Average value: 117 °C Grade Count:3 |
Overview of materials for Polypropylene with 10% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 10% Calcium Carbonate (CaCO3) Filler". Specific grades with primary filler content be.. |