Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Modulus | 1.65 GPa | 239 ksi | 1% secant; ASTM D790A |
Reliance Industries Repol H029SP Polypropylene REPOL Polypropylene H029SP is being manufactured using Unipol PP process, which combines the production efficiency of gas phase fluidized bed reactor with the high activity stereospecific catalyst s.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1% secant; ASTM D790A |
Reliance Industries Repol H030SG Polypropylene REPOL Polypropylene H030SG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1% secant; ASTM D790A |
Reliance Industries Repol H200FG Polypropylene REPOL Polypropylene H200FG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Flexural Modulus | 1.65 GPa @Thickness 6.40 mm |
239 ksi @Thickness 0.252 in |
10mm/min; ASTM D790 |
LG Chemical LUPOL HI4352L PP+Rubber+MF, High Impact Description: Injection Molding, PP+Rubber+MF, Good Dimensional Stability, High ImpactApplication: Automotive Exterior (Sill Side Molding, Door Garnish)CAS: 9003-07-0, 26221-73-8 and 14807-96-6Inform.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Ineos Nova 5410 High Impact Polystyrene High impact, Good ESCR, Good printabilityApplications: Thermoformed containers and lids, Hot and cold beverages cups, Custom sheetProperties were determined on injection molded specimens at 23°C .. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1% secant; ASTM D790-02 |
Ipiranga Petrochem PH 0241 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | |
Kraton® FG1901 + PBT blend (30/70) Blending KRATON FG polymers with PBT significantly improves the toughness. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A-B]n). The KRATON G series are second .. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics LNP THERMOCOMP MX95318 PP LNP* THERMOCOMP* MX95318 is a compound based on Polypropylene containing Proprietary Filler(s). |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, tangent; ASTM D790 |
A. Schulman PP 3466-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3466-01 is a homopolymer polypropylene with the addition of antistatic. This product enhances processing with fast cycle times in injection molding.ApplicationPP 3466-01.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ISO 178 |
Borealis HC110BF Polypropylene Homopolymer HC110BF is a polypropylene homopolymer intended for injection molding and extrusion. Applications: HC110BF has been developed especially for applications like: co-extrusion applications, print lami.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 2mm/min; ISO 178 |
Borealis HC207TF Polypropylene Homopolymer HC207TF is a special nucleated polypropylene homopolymer intended for thermoforming packaging. Applications: HC207TF is recommended for in-line and off line thermoforming, high transparent trays, c.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, tangent; ASTM D790 |
A. Schulman PP 3466-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3466-01 is a homopolymer polypropylene with the addition of antistatic. This product enhances processing with fast cycle times in injection molding.ApplicationPP 3466-01.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ISO 178 |
Unipetrol PP MONSTEN® NB 112 Polypropylene Homopolymer Applications include injection molding and fibers. Basic and anti-gasfading stabilization. Homopolymer.Information provided by Unipetrol RPA |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Total PPC 4481WZ Polypropylene, Impact Copolymer TOTAL Petrochemicals Polypropylene 4481WZ is a nucleated impact copolymer with a Melt Flow index of 4.0 g/10 min.TOTAL Polypropylene 4481WZ is characterized by a good stiffness/impact balance couple.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, tangent; ASTM D790 |
A. Schulman PP 3466-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3466-01 is a homopolymer polypropylene with the addition of antistatic. This product enhances processing with fast cycle times in injection molding.ApplicationPP 3466-01.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | Tangent; ASTM D790 |
Chevron Phillips Marlex® EHM 6004 High Density Polyethylene, Blow Molding This high molecular weight, ethylene homopolymer is tailored for lightweight blow molded containers that:Require excellent stiffnessRequire exceptional processabilityAre durable and recyclable for s.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Covestro Baydur® STR/F-275 IMR Polyurethane Composite SRIM Foam, 20% Glass Filled, MDI-based 2-Component Liquid System Contains continuous strand fiberglass mat.0.0985 in. thickness.Information provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Entec Hyrene® PS-HI 3/3 High Impact Polystyrene Available in North America Features: High Impact ResistanceRoHS Compliant Form: Pellets Information provided by Entec |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Carmel Olefins CAPILENE® G 86 E Polypropylene Homopolymer CAPILENE® G 86 E is a polypropylene homopolymer intended for extrusion and thermoforming applications. This grade is formulated with a low water carry-over additive packaging and it exhibits good m.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ISO 178 |
A.D. Compound Adene NC180A Homopolymer 15% CaCO3 Filled Polypropylene Information provided by A.D. Compound |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Asia Technology Pioneers CAP 702 PP Nanocomposite Description: CAP702 is a hi-tech compounded polypropylene. This Hi-composite is produced by Nano-Technology and used widely in industry and is so cost effective. Advantages:Good paint abilityGood di.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Chevron Phillips Marlex® HMN 6060 Polyethylene, Injection Molding Grade, HDPE
(discontinued **) Meets FDA Regulation 177.1520.Data provided by the manufacturer |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | SAE J949 |
Azdel SuperLite® SL551600-100 PP Resin Matrix / 55% Glass Fiber (3 mm Molded Thickness) AZDEL SuperLite® SL551600-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics Xenoy® X6800BM PBT (Europe-Africa-Middle East) Blow moldable, impact modifed XENOY |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790A |
BP Amoco Acclear® 6219 Homopolymer Polypropylene, High Clarity Grade
(discontinued **) Suggested fabrication methods: Sheet extrusion; ThermoformingFeatures: High clarity, High heat resistance, Good melt strength/flow balanceTypical applications: Rigid packagingComplies with FDA speci.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | ASTM D790 |
Albis Plastics Cellulose Acetate CA700 , Unreinforced, 33% Plasticizer
(discontinued **) Amorphous Cellulose Acetate (CA)Characteristics: Chemical Resistance, Toughness, Strength, Hardness, Gloss, Clarity and "Feel"Applications: Tool Handles, Optical Products, Toys and Sheet ProductsPro.. |
|||
Flexural Modulus | 1.65 GPa | 239 ksi | 1.3 mm/min, 50 mm span; ASTM D 790 |
SABIC Innovative Plastics LNP Stat-kon MDM40 PP LNP* Stat-Kon* MDM40 is a compound based on Polypropylene resin containing Mica and Carbon. Characteristics are Statically Conductive.This data was supplied by SABIC-IP for the Americas region. |