Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PP 1395 PRE-ELEC PP 1395 is a dissipative thermoplastic compound based on polypropylene. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resist.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
North Wood Plastics HDPE with 40% Wood Fiber Data provided by North Wood Plastics, Inc. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | |
3M Dyneon™ Fluorel™ FE-5642Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series grades are Dyneon's cle.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | |
3M Dyneon™ Fluorel II™ FX-11900 Fluoroelastomer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 59%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Excellent processability. Good metal a.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | |
3M Dyneon™ Fluorel™ FC-2178 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phosp.. |
|||
Tensile Strength, Ultimate | 16.0 MPa @Temperature 120 °C |
2320 psi @Temperature 248 °F |
ISO 527 |
LATI LARIL 13-V1KC Mineral Filled Polyphenylene Oxide (PPOm) (UL94V-1)
(Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most .. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D412 |
Covestro Texin® DP7-1157 Thermoplastic Polyurethane + ABS Blend
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
Global D-2022 Low Density Polyethylene, Film Extrusion Grade
(discontinued **) Description-transparency, high toughness, flexibility, high impact strength, good chemical resistanceApplications-bagsMeets FDA requirements as listed in food additives regulation 21 CFR 117.1520 fo.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
ExxonMobil Escorene® LD-612 EVA Injection Molding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A 5.8% vinyl acetate copolymer resin designed for molding and extrusion applications requiring low temperatures, flexibility and toughness. This re.. |
|||
Tensile Strength, Ultimate | 16.0 - 110 MPa | 2320 - 16000 psi | Average value: 67.9 MPa Grade Count:16 |
Overview of materials for Polycarbonate, Conductive This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Conductive". Each property range of values reported is minimum and maximum values of appr.. |
|||
Tensile Strength, Ultimate | 16.0 MPa @Thickness 2.00 mm |
2320 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TFM™ 4105 Modified PTFE, 25% Glass Fiber Filled
(discontinued **) Type II PTFE. Applications include valve seats, bearings, seals/gaskets, moldings, piston rings.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 16.0 MPa @Thickness 2.00 mm |
2320 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TF 4406 PTFE, 60% Bronze Filled
(discontinued **) Type II PTFE. Applications include sliding surfaces, bearings.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ISO 37 |
Kuraray SEPTON® S2004 Thermoplastic Rubber SEPTON® is a series of high performance thermoplastic rubbers developed by Kuraray Co. Ltd. using its isoprene technology. SEPTON® resins are hydrogenated styrenic block copolymers, which exhi.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
ITW Plexus Plexusâ„¢ 3940 Methacrylate Adhesive An adhesive with versatile substrate and application capabilities for a wide range of industrial product assembly applications.Fast tacking, low pressure sprayable adhesive with long bonding range, .. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | |
Momentive Performance Materials TSE392 Translucent Adhesive Sealant, Thixotropic Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive adhes.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 342 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 301 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 342 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ISO 527-1/-2 |
DSM Arnitel® EL250 TPC-ET Injection Molding |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | Die C (35 min / 145°C); ASTM D412 |
Dow SE BR-1220L Stereospecific high cis-1,4 Polybutadiene (BR) SE BR-1220L is manufactured by a solution process using cobalt catalyst which produces polymers with a very light color and low ash content. A non-staining stabilizer is added during the production.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 342 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
ExxonMobil Escorene® LD-730 High EVA Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A high vinyl acetate copolymer with a low melting temperature and excellent strength properties and toughness.Applications: Injection molding; Foams.. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D638 |
Huntsman PE1403 EVA Film Extrusion
(discontinued **) 4% Vinyl Acetate EVA Copolymer, DMF listed and FDA compliantFeatures: High clarity film with good toughness and flexibility at low temperatures.Applications: Film extrusion: frozen food and general .. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ASTM D412 |
KKPC KOSYN KTR 401 Thermoplastic Elastomer (TPE) Thermoplastic Elastomer (TPE)Characteristics: KOSYN KTR101 is linear block copolymer made by solution polymerization which polymerizes butadiene and styrene in organic solvent. It is thermoplastics .. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | |
3M Dyneon™ Fluorel™ FC-2260 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 1.8% Luperco™ 101XL Peroxide, and 2.5 % Triallyl .. |
|||
Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | ISO R527-1 |
LyondellBasell Hifax™ CA186 Thermoplastic Olefin Resin Key Features: medium melt flow, medium modulus, paintable thermoplastic elastomeric olefin resin, excellent impact and stiffness balance, excellent paintability and paint durability, good processabi.. |
|||
Tensile Strength, Ultimate | 16.0 - 67.0 MPa | 2320 - 9720 psi | Average value: 42.9 MPa Grade Count:7 |
Overview of materials for ABS/Polyurethane Alloy This property data is a summary of similar materials in the MatWeb database for the category "ABS/Polyurethane Alloy". Each property range of values reported is minimum and maximum values of appropr.. |