POLYMER SEARCH

DSM Arnitel® EL250 TPC-ET

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyester TPE , Polyester, TP
Manufacturer	DSM Engineering Plastics
Trade Name	Arnitel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DSM Arnitel® EL250 TPC-ET.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Injection Molding

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/in³	ISO 1183
Water Absorption	0.80 %	0.80 %	Sim. To ISO 62
Melt Flow	41 g/10 min @Load 2.16 kg, Temperature 230 °C	41 g/10 min @Load 4.76 lb, Temperature 446 °F	cm<sup>3</sup>/10min Melt Volume-flow Rate; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	25 @Time 3.00 sec	25 @Time 0.000833 hour	ISO 868
Tensile Strength, Ultimate	16.0 MPa	2320 psi	ISO 527-1/-2
Tensile Stress	1.20 MPa @Strain 5.00 %	174 psi @Strain 5.00 %	ISO 527-1/-2
	2.10 MPa @Strain 10.0 %	305 psi @Strain 10.0 %	ISO 527-1/-2
	4.40 MPa @Strain 50.0 %	638 psi @Strain 50.0 %	ISO 527-1/-2
	5.10 MPa @Strain 100 %	740 psi @Strain 100 %	ISO 527-1/-2
Elongation at Break	900 %	900 %	ISO 527-1/-2
Tensile Modulus	0.0250 GPa	3.63 ksi	ISO 527-1/-2
Izod Impact Resistance	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 180/1A
Charpy Impact, Notched	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eA
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	220 µm/m-°C	122 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	220 µm/m-°C	122 µin/in-°F	ISO 11359-1/-2
Melting Point	180 °C	356 °F	10°C/min; ISO 11357-1/-3

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+14 ohm-cm	5.00e+14 ohm-cm	IEC 60093

Users viewing this material also viewed the following:

Copyright © lookpolymers.com All Rights Reserved