Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ASTM D 1922 |
NOVA Chemicals Surpass® FPs117-C Octene Copolymer sLLDPE Film Resins FPs117-C complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food, without .. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | |
Reliance Industries LLDPE film - Zeolite based film Information provided by Reliance Industries |
|||
Elmendorf Tear Strength, MD | >= 12.0 g/micron | >= 305 g/mil | ASTM D1922 |
Eastman Eastar 5445 PCTG Copolyester, Film
(discontinued **) Eastar PCTG 5445 is an amorphous copolyester. Because of its clarity, toughness and good melt strength, Eastar PCTG Copolyester 5445 is useful in a number of applications. It has high gloss and is t.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ASTM D1922 |
ExxonMobil Exceed™ 2018CA Blown Film Resin
(discontinued **) Exceed 2018CA resin is an ethylene based polymer produced with metallocene single site catalysts using ExxonMobil Chemicals EXXPOL® Technology. The higher melt index makes this polymer ideally sui.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ASTM D1922 |
Petroquimica Triunfo Trithene® TS 7045 LDPE - Film - Plastification The Trithene TS 7045 resin is a low-density polyethylene (LDPE) with an excellent processability, which allows for a low energy consumption during extrusion and warrants the production of thin films.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | |
Dow AFFINITY™ PL 1850 Polyolefin Plastomer AFFINITY® PL 1850 polyolefin plastomer is an ethylene alpha-olefin resin designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistanc.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ISO 6283-2 |
Carmel Olefins IPETHENE® 320 Low Density Polyethylene IPETHENE® 320 is a general purpose low density polyethylene film extrusion grade, containing no additives. It exhibits good mechanical and optical properties. APPLICATIONS IPETHENE® 320 is mainl.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ISO 6283-2 |
Carmel Olefins IPETHENE® 322 Low Density Polyethylene IPETHENE® 322 is a general purpose low density polyethylene film extrusion grade. It contains a medium level of anti-blocking and slip additives. It is BHT free. It exhibits a good balance between .. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ISO 6283-2 |
Carmel Olefins IPETHENE® 323 Low Density Polyethylene IPETHENE® 323 is a general purpose low density polyethylene film extrusion grade. It contains a high level of anti-blocking and slip additives. It is BHT free. It exhibits a good balance between me.. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | ASTM D1922 |
NOVA Chemicals Sclair® 11B4 Octene LLDPE Film Resin
(discontinued **) Film Properties. Features: Low gel, excellent seal characteristics, easy processability.Applications: Specialty lamination, co-extrusion.Data provided by the manufacturer. |
|||
Elmendorf Tear Strength, MD | 12.0 g/micron | 305 g/mil | |
Dow LDPE 607A Low Density Polyethylene, High Clarity Blown Film Grade DOW LDPE 607A resin is a fully formulated high clarity blown film resin for thin gauge optical applications, such as bakery film. It contains medium levels of slip additive and low levels of antiblo.. |