NOVA Chemicals Surpass® FPs117-C Octene Copolymer sLLDPE Film Resins

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE)/Octene, Film
Manufacturer	NOVA Chemicals
Trade Name	Surpass®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	NOVA Chemicals Surpass® FPs117-C Octene Copolymer sLLDPE Film Resins.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FPs117-C complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food, without temperature or food-type restrictions, subject to technical suitability.NOVA Chemicals' polyethylene resins are biologically and chemically inert.Features: Easy processability, Superior toughness with excellent tear strength, Excellent seal properties, Low gelAdditives: Antioxidant, Polymer process aidApplications: Lamination film, Co-extruded sealant layer, and high toughness filmFilm properties are typical of blown film extruded on a 2.5" extruder with 4" die and 35-mil die gap at a blow up ratio of 2.5:1, but are dependent upon operating conditions.

Physical Properties	Metric	English	Comments
Density	0.917 g/cc	0.0331 lb/in³	ASTM D 792
Thickness	25.0 microns	0.984 mil	As tested for properties on this data sheet
	12.7 - 76.0 microns	0.500 - 2.99 mil	Recommended range for processing
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 190 °C	1.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	9.00 MPa	1310 psi	ASTM D 882
Film Tensile Strength at Yield, TD	9.00 MPa	1310 psi	ASTM D 882
Film Elongation at Break, MD	540 %	540 %	ASTM D 882
Film Elongation at Break, TD	760 %	760 %	ASTM D 882
Elmendorf Tear Strength MD	300 g	300 g	ASTM D 1922
Elmendorf Tear Strength TD	450 g	450 g	ASTM D 1922
Elmendorf Tear Strength, MD	12.0 g/micron	305 g/mil	ASTM D 1922
Elmendorf Tear Strength, TD	18.0 g/micron	457 g/mil	ASTM D 1922
Dart Drop	16.0 g/micron	406 g/mil	ASTM D 1709/A
Dart Drop Test	400 g	0.882 lb	F50; ASTM D 1709/A
Film Tensile Strength at Break, MD	46.0 MPa	6670 psi	ASTM D 882
Film Tensile Strength at Break, TD	42.0 MPa	6090 psi	ASTM D 882
1% Secant Modulus, MD	126 MPa	18300 psi	ASTM D 882
1% Secant Modulus, TD	132 MPa	19100 psi	ASTM D 882
Heat Seal Strength Initiation Temperature	100 °C	212 °F	Temperature at which a 2-mil film achieves a seal strength of 4.4N/13mm. Tested at 0.5s dwell, 0.27 N/mm² bar pressure, 305mm/min. pull speed.

Optical Properties	Metric	English	Comments
Haze	7.0 %	7.0 %	LDPE blended; ASTM D 1003
	16 %	16 %	100% LLDPE; ASTM D 1003
Gloss	37 %	37 %	At 45°, 100% LLDPE; ASTM D 2457
	72 %	72 %	At 45°, LDPE blended; ASTM D 2457

Processing Properties	Metric	English	Comments
Melt Temperature	180 - 200 °C	356 - 392 °F	Recommended
Die Opening	0.0889 - 0.216 cm	0.0350 - 0.0850 in	Recommended range
Blow-up Ratio (BUR)	2.0 - 3.0	2.0 - 3.0	Optimum range

Descriptive Properties	Value	Comments
Low Friction Puncture	79 (J/mm)	NOVA Chemicals test method

Users viewing this material also viewed the following: