Polymer Property : Tensile Strength, Yield = 5800 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	40.0 MPa	5800 psi	5 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® HMG94MD ABS Superior flow, injection molding ABS for medical applications. Good impact. For thin-wall applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® S703T ABS (Europe-Africa-Middle East) CYCOLAC S703T is a super high flow ABS developed for thin wall injection/compression moulding applications.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Ineos Nova 4211 Medium Impact Polystyrene (discontinued **) Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o..
Tensile Strength, Yield	40.0 MPa	5800 psi	2 in/min; ASTM D638
BASF Capron® 8224 HSL Nylon 6 (Conditioned) (discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line.
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RI 55 Rigid PVC, Injection Molding Fittings for building trade - high fluidity
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RK 325 Rigid PVC, Extrusion Lead Free Verticle curtains
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RK 325/AM Rigid PVC, Extrusion Lead Free Profiles anti mould
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RL 455/AB Rigid PVC, Antishock Extrusion Corrugated antishock electric pipes
Tensile Strength, Yield	40.0 MPa	5800 psi	60Â°C for 500 hrs with 95% RH
Fujipoly Industries SarconÂ® 45GSR Thin-Film GSR Sarcon GSR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GSR is a composite of..
Tensile Strength, Yield	40.0 MPa	5800 psi	Conditioned; ISO 527-1/-2
Lanxess DurethanÂ® BC 30 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RKS 321 Rigid PVC, Antishock Extrusion Lead Free Outdoor antishock profiles
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Noryl V080 PPE+HIPS (Europe-Africa-Middle East) NORYL V080 is an unfilled, flame retardant, high flow material and is halogen free according to VDE/DIN 472 part 815.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527 type 1 A
Solvay TECHNYLÂ® A 238 Black 21 N PA66, Conditioned Description: Unreinforced and modified polyamide 66, with improved impact resistance, heat stabilized, for injection molding.Available in: EuropeProduct Applications: TECHNYL A 238 offers excellent ..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
SABIC Innovative Plastics LNP STAT-LOY KX95702 Acetal LNP STAT-LOY* KX95702 is a compound based on Acetal resin containing Proprietary Filler(s). Added feature of this material is: Antistat.
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527-1/-2
Suzhou Hipro Polymers HiprolonÂ® 400 NN Nylon, conditioned HiprolonÂ® 400 NN is a medium viscosity specialty polyamide. Features: low density, low water absorption, high dimension stability, high notched impact resistance in large temperature ranges, and..
Tensile Strength, Yield	40.0 MPa	5800 psi	9.8 in/min; ASTM D638
Teknor Apex Sinvicomp DBS 5608 Polyvinyl Chloride, Rigid Availability: Asia Pacific Features: High Impact Resistance Uses: Piping Forms: Powder Processing Method: ExtrusionInformation Provided by Teknor Apex
Tensile Strength, Yield	40.0 MPa	5800 psi	2 in/min; ASTM D638
A. Schulman POLYFORT™ FPP 2388 Glass Reinforced Polypropylene DescriptionPolyfort® FPP 2388 is a 5% glass reinforced polypropylene.Information provided by A. Schulman.
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D 638
Cossa Polimeri ESTADIENE 1030 V0/F Flame Retardant ABS Acrylonitrile Butadiene StyreneFlame retardant class V0, PBDE free, high melt flow rate, good impact resistance, high gloss, good light resistance, excellent processabilityInformation provided by Co..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BS EC PA6 Product description: Grilon BS 23 is an unreinforced, low viscosity and fine crystalline PA 6 injection molding grade. Grilon BS 23 has the following important properties: Good flow behaviorEasy pro..
Tensile Strength, Yield	40.0 MPa @Temperature 160 °C	5800 psi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TS300 PA46
Tensile Strength, Yield	40.0 MPa	5800 psi
EMS-Grivory Grivory® L 20 G grey 9280 PA12 Product Description: Grilamid L 20 G grey 9280 is a medium viscosity, unreinforced, heat stabilized polyamide 12 for injection molding and cable sheathing. The main features of this product are: Low..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 H FR PA12 FR Product Description: Grilamid L 20 H FR is a flame retarded, medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20 H FR contains no halogen or phosphorus, it has a light natural colo..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 HL black 9563 PA12 Product Description: Grilamid L 20 HL black 9563 is a, medium viscosity extrusion grade, based on Polyamide 12 (PA12). Grilamid L20 HL black 9563 has been especially developed for external cable she..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527-1/-2
DuPont Performance Polymers Delrin® 100ST BK602 Acetal (POM) (Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer Delrin 100ST BK602 is a super tough high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed part..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 25 LM PA12 Product Description: Grilamid L 25 LM is a heat and UV stabilized nylon 12 grade for tube extrusion. According to DIN 73378 Grilamid L 25 LM corresponds to the type PA 12 HL. Grilamid L 25 LM fulfil..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527-2
Ascend Performance Materials Vydyne® M344 Nylon 66/6, ignition resistant, Conditioned Vydyne® M344 is a halogenated, unfilled, flame-retardant PA66/6 copolymer designed with excellent strength and toughness. It is lubricated for machine feed and easy mold release and has an Underwri..
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527-1/-2
BASF Ultramid® FRee B3U31G4 20% Glass Filled PA66 FR (Conditioned) Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire..
Tensile Strength, Yield	40.0 MPa	5800 psi
Fainplast Compounds R 314 Rigid PVC, Extrusion Electric channels and various profiles