Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 871 °C |
39200 psi @Strain 0.200 %, Temperature 1600 °F |
|
Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, 1.6 mm thick sheet Machined with tungsten-carbide tools. Inherent wear resistance, resistant to the wearing effects of hard, sharp particles such as in screw conveyors, rock crushing rollers, tile-making machines, and.. |
|||
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 760 °C |
39200 psi @Strain 0.200 %, Temperature 1400 °F |
|
Haynes 188 alloy, hot rolled and 1175°C solution annealed plate Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
Tensile Strength, Yield | 270 MPa @Temperature 870 °C |
39200 psi @Temperature 1600 °F |
|
Haynes Hastelloy® W alloy as a weld filler, base metal Alloy 625/ Alloy 718 12.7 mm plate weldments Solid solution-strengthened developed as a filler metal for welding of dissimilar alloys. Applications include excellent dissimilar welding characteristics in the gas turbine, aerospace, and chemica.. |
|||
Tensile Strength, Yield | >= 270 MPa | >= 39200 psi | |
MetalTek MTEK 29-10 Cast UNS J93403 Heat Resistant Stainless Steel Higher chrome and nickel bring greater strength and ductility.Applications: Furnace chains, ore roasting equipment.Information provided by MetalTek |
|||
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 760 °C |
39200 psi @Strain 0.200 %, Temperature 1400 °F |
|
Haynes 188 alloy, cold rolled and 1175°C solution annealed sheet Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 550 °C |
39200 psi @Strain 0.200 %, Temperature 1020 °F |
Annealed prior to test |
Special Metals BRIGHTRAY® Alloy F Electrical Resistance Alloy A nickel-iron-chromium electrical-resistance alloy for use at temperatures up to 1920°F (1050°C) under continuous operating conditions. Its high iron content and relatively low level of nicke.. |
|||
Tensile Strength, Yield | 270 MPa | 39200 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP LX08411 PEEK LNP* THERMOCOMP* LX08411 is a compound based on Polyetheretherketone resin containing Carbon Fiber. Added feature of this material is: Opaque. |
|||
Tensile Strength, Yield | 270 MPa @Temperature 75.0 °C |
39200 psi @Temperature 167 °F |
Wet; EN2561 |
Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, 37%/7781 Fiber Information provided by HexCel |
|||
Tensile Strength, Yield | 270 MPa @Temperature 100 °C |
39200 psi @Temperature 212 °F |
Wet; EN2561 |
Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, 37%/7781 Fiber Information provided by HexCel |
|||
Tensile Strength, Yield | 270 MPa @Temperature 75.0 °C |
39200 psi @Temperature 167 °F |
90º, Wet; EN2561 |
Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, 37%/7781 Fiber Information provided by HexCel |
|||
Tensile Strength, Yield | 270 MPa | 39200 psi | |
AK Steel Hot Rolled Carbon Steel, Commercial Steel (CS Type B), Standard Grade May be moderately formed. A specimen cut in any direction can be bent flat on itself without cracking.Information provided by AK Steel |
|||
Tensile Strength, Yield | >= 270 MPa | >= 39200 psi | |
Aleris Alustar Aluminum Alloy, H321/H116; 2 - 20 mm thickness At least 20% stronger than AA 5083 before and after welding. Bendability and weldability similar to AA 5083. High corrosion resistance. Provides options for ship design and building.Composition d.. |
|||
Tensile Strength, Yield | 270 MPa | 39200 psi | |
Ametek Ultra 304L P/M Stainless Steel, Sintered from 6.75 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Yield | 270 MPa | 39200 psi | |
Ametek Ultra 316L P/M Stainless Steel, Sintered from 6.8 g/cc Green Density Ametek's patented Ultra Stainless Steels™ are produced by alloying the conventional austenitic compositions with a small amount of a copper-nickel-tin alloy. This results in a marked improvement i.. |
|||
Tensile Strength, Yield | 270 MPa | 39200 psi | Typical |
ATI Allegheny Ludlum Stainless Steel AL 904L™ Alloy (UNS N08904) Allegheny Ludlum AL 904 L™ Alloy (UNS N08904) is an austenitic stainless steel alloy designed for a middles to high level of corrosion resistance. The alloy is produced to low carbon levels for us.. |
|||
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 649 °C |
39200 psi @Strain 0.200 %, Temperature 1200 °F |
|
Haynes 230® alloy, hot rolled and 1232°C solution annealed plate Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |
|||
Tensile Strength, Yield | 270 MPa @Strain 0.200 %, Temperature 649 °C |
39200 psi @Strain 0.200 %, Temperature 1200 °F |
|
Haynes 230® alloy, cold rolled and 1232°C solution annealed sheet Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |