Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 17.9 MPa | 2600 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W9400 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable Y152 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
ExxonMobil Escorene® LL-8461 LLDPE, Rotational Molding Powder
(discontinued **) Data Provided by Exxon Chemical Canada.Characteristics: Fully formulated, UV-8 type protection, Good stiffnessUses: Septic tanks, Chemical storage bins, Potable water tanks |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR Iceberg Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
ExxonMobil Escorene® LL-8461 LMDPE Rotational Molding Grade
(discontinued **) Data provided by the manufacturer, Exxon Chemical.LL-8400 series are linear medium density polyethylene resins that provide outstanding environmental stress crack resistance. LL-8461 is fully formu.. |
|||
Tensile Strength, Yield | 17.9 - 24.1 MPa | 2600 - 3500 psi | ASTM D638 |
Arkema Group Kynar Flex® 2950 PVDF Copolymer
(discontinued **) Copolymer Series, Kynar® components are used extensively in the high purity semiconductor market, the pulp and paper industry, nuclear waste processing, and the general chemical processing industry.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
Global TPO-55D TPO Grade Data provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D1457 |
Greene Tweed Avalon® 57 PTFE, Thermoset Resin Filled Products made from Avalon® thermoplastics are constructed from proprietary high-performance reinforced PTFE material. Greene, Tweeds Avalon thermoplastics, available in grades ranging from virgin.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2590 psi | |
Spartech 2850-80 PVC for Regulated Applications Information provided by Spartech |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D412 |
Teknor Apex Flexalloy® 3501-70-NT Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MW, Ethylene Oxide SterilizableForms-PelletsProcessing-Extrusion, Injection MoldingAppe.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
Lubrizol Hipscon™ M-505 Static Control High Impact Polystyrene Hipscon™ M-505 is a conductive, carbon black filled, High Impact Polystyrene available as extruded sheet. Thermoformed trays are lightweight and easily formed into deep pockets that maintain unifo.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
A. Schulman PP 1692 Polypropylene High Impact Copolymer DescriptionPolypropylene PP 1692 is an exceptional high impact copolymer with high flow for appearance parts.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | At 50 mm/min; ASTM D683 IV |
Borealis Borecene™ RM8342RC Linear Polyethylene for Rotational Molding Borecene RM8342RC is a third generation linear medium density natural polyethylene for rotational molding. Borecene RM8342RC is a special grade, which has passed many rigorous tests and can be cons.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
A. Schulman PP 1692 Polypropylene High Impact Copolymer DescriptionPolypropylene PP 1692 is an exceptional high impact copolymer with high flow for appearance parts.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D638 |
A. Schulman PP 1692 Polypropylene High Impact Copolymer DescriptionPolypropylene PP 1692 is an exceptional high impact copolymer with high flow for appearance parts.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | at 2.0 in/min, Tested using a 50 mil. sheet; ASTM D638 |
Chevron Phillips EB6755 Rubber Modified Polystyrene DescriptionChevron EB6755 is an extrusion grade, high impact polystyrene developed for use in packaging applications. It is designed for exceptional environmental stress-crack resistance and practi.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLDPE LL 8450.31 Linear Low Density Polyethylene Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLDPE LL 8460.29 Linear Low Density Polyethylene Resin Product Description: LL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance o.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLDPE LLP 8450.31 Linear Low Density Polyethylene Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | chs 2.0 in/min; ASTM D638 |
Diamond Polymers NPP25-0620 Copolymer Polypropylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D-638 |
Axiall 1275 Plenum Flexible PVC Plenum-grade optical fiber jacket. UL QMTM2 recognized component for plenum cable compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D-638 |
Axiall 13872 Wire & Cable Flexible PVC Non-lead stabilized, 720 hour sunlight resistant insulation compound recommended for TW and 75°C Class 43 applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in .. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | ASTM D-638 |
Axiall 8823 Moldings & Extrusions Flexible PVC A UL certified flame retardant, clear flexible PVC compound recommended for a maximum service temperature of 60°C. Exhibits good migration resistance properties. UL approved for 94 V-0 at 2.30 mm.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® LP624 Stabilized High Density Polyethylene DescriptionPolyaxis CP 624 is a stabilized high density polyethylene rotational molding compound with good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | |
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 90A, Black Sulfur Cure Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Tensile Strength, Yield | 17.9 - 26.6 MPa | 2600 - 3860 psi | Average value: 22.1 MPa Grade Count:30 |
Overview of materials for High Density Polyethylene (HDPE), Rotational Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Rotational Molding Grade". Each property range of values reported is m.. |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W2407 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 17.9 MPa | 2600 psi | 2" (50mm) per min; ASTM D638 |
Formosa Plastics Formolene® 2620A Impact Copolymer Polypropylene Impact Copolymer for Compounding and Injection Molded Applications Formolene® 2620A is a high impact copolymer of polypropylene designed for applications such as automotive compounds and lawn & gar.. |