- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Yield = 200 MPa
Polymer Property : Tensile Strength, Yield = 200 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 200 MPa @Strain 0.200 %, Temperature 100 °C |
29000 psi @Strain 0.200 %, Temperature 212 °F |
EN min.; EN 10002-5 |
| Outokumpu 153MA™ High Temperature Austenitic Stainless Steel Variant of 1.4301 with increased silicon and nitrogen contents and microalloyed with rare earth metals (REM). This raises the max service temperature in dry air to 1000°C.Applications: Heat and cr.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 1.00 %, Temperature 300 °C |
29000 psi @Strain 1.00 %, Temperature 572 °F |
EN min.; EN 10002-5 |
| Outokumpu 253MA® High Temperature Austenitic Stainless Steel Variant of 1.4828 with increased nitrogen content and has been microalloyed with rare earth metals (REM). The most suitable temperature range is 850-1100°C, because structural changes when used be.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 1.00 %, Temperature 300 °C |
29000 psi @Strain 1.00 %, Temperature 572 °F |
EN min.; EN 10002-5 |
| Outokumpu 254 SMO® High Performance Austenitic Stainless Steel Applications: Process equipment in chemical industryBleaching equipment in the pulp and paper industryFlue-gas cleaningDesalinationSeawater handlingHeat exchangersAvailable in hot rolled plate (Quar.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 0.200 %, Temperature 300 °C |
29000 psi @Strain 0.200 %, Temperature 572 °F |
EN min.; EN 10002-5 |
| Outokumpu 4016 Ferritic Stainless Steel Fairly good corrosion resistant formable steel in mildly corrosive environments. Oxidation resistant at elevated temperatures (up to ~800°C). Ductile, does not work harden readily, and is well su.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4306 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4307 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 1.00 %, Temperature 300 °C |
29000 psi @Strain 1.00 %, Temperature 572 °F |
EN min.; EN 10002-5 |
| Outokumpu 4318 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled strip/sheet (CPP) and cold rolled strip sheet forms. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4541 Cr-Ni Austenitic Stainless Steel Good corrosion resistance and weldable. Resistant to sensitization.Applications: Welded screensFurnace beltsCatalytic converter meshAvailable in hot rolled plate (Quarto), hot rolled strip/sheet (C.. |
|||
| Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4550 Austenitic Stainless Steel Good corrosion resistance and weldable. Resistant to sensitization.Applications: Welded screensFurnace beltsCatalytic converter meshAvailable in hot rolled plate (Quarto) and rod forms. |
|||
| Tensile Strength, Yield | >= 200 MPa @Temperature 100 °C |
>= 29000 psi @Temperature 212 °F |
|
| PEAK Werkstoff DISPAL S250 Aluminum Alloy, AlSi20Fe5Ni2, Condition F Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational.. |
|||
| Tensile Strength, Yield | 200 MPa @Thickness 1.57 mm |
29000 psi @Thickness 0.0620 in |
LW; ASTM D638 |
| Industrial Laminates/Norplex NP193E Synthetic Fabric Description: 17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temp.. |
|||
| Tensile Strength, Yield | >= 200 MPa @Strain 0.200 % |
>= 29000 psi @Strain 0.200 % |
|
| Industeel CLC 18.10 L General Purpose 18Cr-10Ni Austenitic Stainless Steel Description: CLC 18-10L is a 18Cr-10Ni austenitic stainless steel. The grade contains small amount of ferrite (~ 3%) after solution annealing (1000-1100°C – 1832-2012°F) and water quenchi.. |
|||
| Tensile Strength, Yield | 200 MPa @Temperature 538 °C |
29000 psi @Temperature 1000 °F |
Vacuum |
| ATI Wah Chang Nb/Nb Alloy C-103 This alloy satisfies most rocket engine applications for temperatures up to 2700°F because of superior mechanical properties at all temperatures. Offers weight savings over many rocket engine desig.. |
|||
Copyright © lookpolymers.com All Rights Reserved