Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Finathene® 6002 HDPE, blow molding, pipe
(discontinued **) FINATHENE® 6002 is a high density polyethylene produced by the slurry loop low pressure polymerization process. FINATHENE® 6002 has been especially developed for the manufacturing of toys and of b.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Lacqtene® 2004 TN 52 HDPE pipe
(discontinued **) LACQTENE® 2004 TN 52 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2004 TN 52 is best processed between 190 and 230°C.Informa.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Lacqtene® 2005 TN 59 HDPE pipe
(discontinued **) LACQTENE® 2005 TN 59 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2005 TN 59 is best processed between 190 and 230°C.Informa.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | |
LyondellBasell Lupolen® 5361 A HDPE, Blow Molding Grade Easy-to-process blow molding grade for stackable canisters (up to 60 l), used for packing surface-active liquids, laundry and dishwashing detergents, disinfectants, drums (up to 220 l) for various s.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total 49080 UV HDPE blow molding FINATHENE® 49080 UV is produced by the slurry loop low pressure polymerization process. FINATHENE® 49080 UV is a U.V.-stabilized, high molecular weight pelletized resin, intended for the productio.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | notched; ISO 8256/1 |
DuPont Performance Polymers Hytrel® 4053FG NC010 Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | notched; ISO 8256/1 |
DuPont Performance Polymers Hytrel® 4056P Polyester Elastomer TPC-ET
(Unverified Data**) 40 Shore D High Performance Polyester Elastomer in Powder FormInformation provided by DuPont Performance Polymers |
|||
Tensile Impact Strength | 229 kJ/m² | 109 ft-lb/in² | ASTM D-1822 |
Axiall 9190 Rigid PVC, Molding Georgia Gulf 9190 was developed to aid compliance with source reduction initiatives especially when low temperature impact strength is a concern. It has superior properties, which in most cases wil.. |
|||
Tensile Impact Strength | 230 kJ/m² | 109 ft-lb/in² | Notched, 23°C; ISO 8256 |
Total Finathene® SI 508 HDPE blow molding
(discontinued **) Finathene® SI 508 is part of a new generation of high density ethylene-hexene copolymers produced by the slurry loop low pressure polymerization process. Finathene® SI 508 is a high molecular weig.. |