Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength | 20.0 MPa | 2900 psi | 50 mm/min - CH; ISO 527 |
Nyco NYGLOS® 4W STO105 Wollastonite in Polypropylene Data for polypropylene reinforced with 15% Nyco NYGLOS® 4W STO105 Wollastonite. Polypropylene used is Braskem TI6200Q High Impact Copolymer 20 MFR -NBWollastonite (calcium metasilicate, or CaSiO3).. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ISO 527 |
Murtfeldt Original Material ”S”® plus + LF ESD Polyethylene, Low Friction Conductive This material is electrically conductive and has half the sliding friction coefficient of the Original Material ”S”® enabling voltage to be dissipated at maximum speed with the same maximum frict.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ISO 527 |
Murtfeldt Original Material ”S”® plus + LF Polyethylene, Low Friction This material has half the sliding friction coefficient of the Original Material ”S”®. This enables an increased machine running speed at the same time as less abrasion and thus a lower maintenan.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ASTM D638 |
Premix Premi-Glas® 1200-10 Fiberglass Reinforced Thermoset SMC Premi-Glas® 1200-10 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness.Key features and benefits are:Excellent st.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | at Yield; ISO 527-1/-2 |
Quadrant EPP TIVAR® 1000 antistatic PE-UHMW + carbon black (ISO Data) By incorporating an effective carbon black grade, TIVAR 1000 antistatic offers the electrostatic dissipative properties often required for PE-UHMW components operating at high line speeds and convey.. |
|||
Tensile Strength | 20.0 - 30.0 MPa | 2900 - 4350 psi | Injection; ISO 527 |
Raschig Group 4554 Silicone Glass fiber reinforced silicone molding compound. Excellent thermal stability - up to 300°C, exceptional electrical properties, good mechanical strength, very good dimensional stability. Processi.. |
|||
Tensile Strength | 20.0 - 40.0 MPa | 2900 - 5800 psi | Compression; ISO 527 |
Raschig Group DECAL® 937 Phenolic Mica reinforced phenolic molding compound. This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (W.. |
|||
Tensile Strength | 20.0 - 30.0 MPa @Temperature 25.0 °C |
2900 - 4350 psi @Temperature 77.0 °F |
stainless steel after 24 hours |
Permabond TA459 Toughened Acrylic Adhesive Permabond TA459 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This product was specifically designed to be non-corrosive to sens.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ASTM D2095 |
Permabond UV7141 UV-curable Adhesive Permabond UV7141 is a UV-curable adhesive with a secondary anaerobic cure mechanism. This makes it ideal for bonding materials such as ceramic-coated glass, mirrors, etc. where UV-light cannot penet.. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | ISO 6922 |
Permabond 791 Cyanoacrylate, Surface insensitive PERMABOND® 791 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces. Plastics, metals, ceramics and elastomers ar.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | Measured on films cast from a solution in toluene; ASTM D412 |
Kraton® D1111 K (SIS) Linear Triblock Copolymer Description: Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified: .. |
|||
Tensile Strength | 20.0 - 25.0 MPa | 2900 - 3630 psi | DIN 53455 |
Isoflon FEP Fluorinated Ethylene Propylene Fluoropolymer material specifications.Information provided by Isoflon. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | extruded; ASTM D4894 |
Guarniflon PTFE G400 Polytetrafluoroethylene A virgin PTFE with low coefficient of friction, excellent chemical inertness, non-adhesive surface, wide service temperature range, and excellent dielectric propertiesInformation provided by Guarnif.. |
|||
Tensile Strength | 20.0 - 30.0 MPa | 2900 - 4350 psi | DIN 53455 |
Isoflon PTFE Polytetrafluoroethylene Fluoropolymer material specifications.Information provided by Isoflon. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | ASTM D638 |
Solvay Specialty Polymers Polidan® PNT 0555/06 Polyethylene, Crosslinked (XLPE) POLIDAN® PNT 0555/06 is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes... |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | ASTM D638 |
Solvay Specialty Polymers Polidan® PNT 0856/35 Polyethylene, Crosslinked (XLPE) POLIDAN® PNT 0856/35 is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction.Features: Crosslinkable; Good Flexibility; Lo.. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | ASTM D638 |
Solvay Specialty Polymers Polidan® T/A-LX Polyethylene, Crosslinked (XLPE) POLIDAN® T/A-LX is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes.Featu.. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | |
Shandong Dongyue Polymer DF-31A PTFE Pelletized Resin Usage: The resin is used to auto press molding and ram extrusion all kinds of rods, pipe etc.Packing: PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.Storage: PTF.. |
|||
Tensile Strength | >= 20.0 MPa | >= 2900 psi | |
Shandong Dongyue Polymer DF-31B PTFE Pelletized Resin Usage: The resin is used to auto press molding and ram extrusion all kinds of rods, pipe etc.Packing: PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.Storage: PTF.. |
|||
Tensile Strength | 20.0 - 35.0 MPa | 2900 - 5080 psi | Moulding Direction; BS2782:Pt3 |
Dalau Dalcon 020 Virgin PTFE, Carbon (Anti-Static) Applications & Industries: General: The static and dynamic friction coefficient are numerically equal, consequently no ’Stick Slip’ occurs. Electrical: Ideal for Anti - Static Applications; Anti -.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ASTM D638 |
Ecomass® 4710BI71 Filled Polyurethane, Injection Molding Moderate Specific Gravity, Filled Polyurethane (TPU), Good Flexibility, Product Form - PelletsProcessing Method: Injection MoldingNontoxic alternative to Lead for weighting, balancing and vibration.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | DIN 53 455 |
Hippe PE 1000 Polyethylene Tough, flexible and stiff, depending on the crystalline structure (density). Resinous surface. Excellent dielectric properties, Good resistance against solvents, acids and alkalis. Physiologicall.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | after storage in water at 80°C for 42 days; ISO 37 |
BASF Elastollan 1154 D FHF TPUR Flame Retardant Halogen Free Description: Thermoplastic Polyether Polyurethane Elastomers with outstanding hydrolysis resistance, low temperature flexibility and resistance to micro-organisms.Typical Applications: Cable sheathi.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ISO 37 |
BASF Elastollan B 60 A ESD TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tensile strength, good damping and resilience performance and sup.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | after storage in water at 80°C for 42 days; ISO 37 |
BASF Elastollan B 60 A ESD TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tensile strength, good damping and resilience performance and sup.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ASTM D638 |
Americas Styrenics EB6755 High Impact Polystyrene Product CharacteristicsGood Environmental Stress Crack Resistance (ESCR)Good practical toughnessDeep draw thermoforming capableGood low temperature impactFood Contact CompliantTypical ApplicationsPa.. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | ASTM D638 |
Aaron Industries AAROLENE® ARPE LD 300-1 Low Density Polyethylene Compounded Resin AAROLENE® ARPE 300 Series Polyethylene Compounded Resin LDPEColor may be specified. Melt Flow Index may be specified. Specific Gravity may be specified. |
|||
Tensile Strength | 20.0 MPa | 2900 psi | |
AlphaGary GW 2450-VW1 03 LCF Flame Retardant Polyvinyl Chloride 105°C rated insulation compound |
|||
Tensile Strength | 20.0 MPa | 2900 psi | |
AlphaGary GW 2463 H VW1 LCF Flame Retardant Polyvinyl Chloride 105°C rated compound for thin wall ribbon cable application |