Physical Properties | Metric | English | Comments |
---|---|---|---|
Storage Temperature | 0.000 - 30.0 °C | 32.0 - 86.0 °F | |
Silikony Polskie Polimer MV 0.07 Methylvinylsilicone Gum POLIMER MV is the main starting material for production of HTV silicone rubber. Methylvinylsilicone gum should be compounded with crosslinking agents (peroxides), fillers and other additives. Methyl.. |
|||
Storage Temperature | 0.000 - 30.0 °C | 32.0 - 86.0 °F | |
Silikony Polskie Polimer MV 1.0 Methylvinylsilicone Gum POLIMER MV is the main starting material for production of HTV silicone rubber. Methylvinylsilicone gum should be compounded with crosslinking agents (peroxides), fillers and other additives. Methyl.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Silikony Polskie Polsil Gum 100/40 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from Polsil® GUM shows useful properties: agei.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Silikony Polskie Polsil Gum 100/50 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from Polsil® GUM shows useful properties: agei.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Silikony Polskie Polsil Gum 100/60 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from Polsil® GUM shows useful properties: agei.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Silikony Polskie Polsil Gum 410/30 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from Polsil® GUM shows useful properties: agei.. |
|||
Storage Temperature | 0.000 °C | 32.0 °F | |
Hexcel® Redux® 101 Surface Pretreatment Protection Solution The Redux 100 series is a range of resin solutions used for protecting light alloy surfaces that have been pretreated for bonding but must be stored temporarily before bonding is completed.A thin co.. |
|||
Storage Temperature | 0.000 °C | 32.0 °F | |
Hexcel® Redux® 119 Surface Pretreatment Protection Solution The Redux 100 series is a range of resin solutions used for protecting light alloy surfaces that have been pretreated for bonding but must be stored temporarily before bonding is completed.A thin co.. |
|||
Storage Temperature | 0.000 °C | 32.0 °F | |
Hexcel® Redux® 122 Surface Pretreatment Protection Solution The Redux 100 series is a range of resin solutions used for protecting light alloy surfaces that have been pretreated for bonding but must be stored temporarily before bonding is completed.A thin co.. |
|||
Storage Temperature | 0.000 - 4.44 °C | 32.0 - 40.0 °F | Film and Liquid |
Hexcel® Redux® 775 Vinyl phenolic structural adhesive Redux 775 was adopted as the world's first metal-to-metal bonding process to be officially approved for use in the manufacture of aircraft primary structures in 1943. It is available either as a fil.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Akzo Nobel Trigonox® A-W70 Polymerization Initiator Initiator for the (co)polymerization of styrene, acrylonitrile, vinylchloride, vinylidenechloride, acrylates and methacrylates. Trigonox A-W70 may also be used as an initiator for the room temperatu.. |
|||
Storage Temperature | 0.000 - 25.0 °C | 32.0 - 77.0 °F | |
Akzo Nobel Trigonox® C-C75 Polymerization Initiator Initiator for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates.Chemical Description: tert-Butyl peroxybenzoate, 75% solution in odorless mineral spiritsCAS Num.. |
|||
Storage Temperature | 0.000 - 20.0 °C | 32.0 - 68.0 °F | |
Akzo Nobel Trigonox® TMBH-L Polymerization Initiator Initiator for the (co)polymerization of styrene, butadiene, acrylonitrile, acrylates and methacrylates.Chemical Description: 1,1,3,3-Tetramethylbutyl hydroperoxide, 90% in solvent mixtureCAS Number:.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Akzo Nobel Trigonox® A-80 Polymerization Initiator Initiator for the (co)polymerization of styrene, butadiene, acrylonitrile, acrylates and methacrylates.Chemical Description: tert-Butyl hydroperoxide, 80% solution in waterCAS Number: 75-91-2Acronym.. |
|||
Storage Temperature | 0.000 - 40.0 °C | 32.0 - 104 °F | |
Silikony Polskie Polsil Gum 213/60 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from Polsil® GUM shows useful properties: ageing.. |