Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM 792 |
Multibase Nylex™ 1230 Natural Polyamide + PP Features: Crack Resistance, GoodDimensional Stability, GoodImpact Resistance, GoodMoisture ResistantProcessability, GoodForms:PelletsProcessing Methods:Injection MoldingUses: Electrical PartsHousing.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | Part B |
Resinlab® EP1112 Clear Electronic Grade Epoxy Encapsulant Resinlab™ EP 1112 Clear is a two part unfilled fast curing electronic grade epoxy encapsulant designed for small to medium sized castings. It cures completely at room temperature to a tough, flexib.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23/23°C; ASTM D792 |
RheTech Products FT4500-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Automotive componentsDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23/23°C; ASTM D792 |
RheTech Products FT4650-01UV Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Scuff platesExterior grillesBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Quadrant EPP TIVAR® SuperPlus UHMW-PE, Glass-filled Cross-linked & Heat Stabilized Extreme Wear Resistant (ASTM Product Data Sheet) |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 8123-45S100 Thermoplastic Elastomer
(discontinued **) A hard, black thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material has low friction and is especially designed for use as a co-extruded slip-coat layer on weath.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183 |
Polimeri Europa Eraclene® MP 90 High Density Polyethylene - Injection Molding Eraclene MP 90 is a high density polyethylene homopolymer resin (HDPE) with antioxidants, suitable for injection molding application.Eraclene MP 90 has a narrow molecular weight distribution and a h.. |
|||
Specific Gravity | 0.960 - 1.00 g/cc | 0.960 - 1.00 g/cc | |
Michelman® Hydrosize® PP2-01 Nonionic polypropylene emulsion Description: Nonionic polypropylene emulsionUsage: Hydrosize® PP2-01 is an APE-free sizing for fiberglass for LFT and carbon fiber with excellent bond strength.Application data: Small particle si.. |
|||
Specific Gravity | 0.960 - 0.980 g/cc | 0.960 - 0.980 g/cc | |
Michelman® Michem® Lube 270R Anionic paraffin/polyethylene wax emulsion Description: Anionic paraffin/polyethylene wax emulsionUsage: Michem® Lube 270R is an additive which provides excellent water resistance in paint and coating formulations. This product is useful .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Shin-Etsu Silicones KF-9909 Fluid Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Teknor Apex Synres® PP G10 17 Polypropylene, Glass Reinforced Notes: The Specialty Compounding Division offers a proprietary line of glass reinforced polypropylene. Typical applications include automotive, building and construction, industrial as well as many .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
A. Schulman POLYBATCH™ 10178Z Amber Concentrate Based in LDPE Description POLYBATCH® Amber 10178Z is an amber color concentrate based in LDPE. ApplicationPOLYBATCH® 10178Z is designed for use between 3 and 5% in HDPE molded bottles (approx. 50 mil) to achiev.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer DescriptionFormion® FI 120 is a non-reinforced, transparent, injection molding grade Zinc Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and lo.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
A. Schulman POLYBATCH™ Teal 30316 Concentrate Based In LLDPE DescriptionPOLYBATCH® 30316 is a teal color concentrate based in LLDPE. This concentrate was designed to provide color and opacity in blow molding applications. POLYBATCH® 30316 is typically re.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer DescriptionFormion® FI 120E is a non-reinforced, transparent, extrusion grade Zinc Ionomer. It has been formulate for high durability, cut and puncture resistance, and low temperature ductility.Ap.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
A. Schulman POLYBATCH™ Teal 30316 Concentrate Based In LLDPE DescriptionPOLYBATCH® 30316 is a teal color concentrate based in LLDPE. This concentrate was designed to provide color and opacity in blow molding applications. POLYBATCH® 30316 is typically re.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183 |
Total Lumicene® M6040 Metallocene High Density Polyethylene Lumicene® M6040 is a second generation metallocene high density polyethylene with very good organoleptic properties, dimensional stability, rigidity and processability.It is especially suited for t.. |
|||
Specific Gravity | 0.960 g/cc @Temperature 25.0 °C |
0.960 g/cc @Temperature 77.0 °F |
|
Dow Corning XIAMETER® PMCPPMX-0246 Cyclohexasiloxane Is chemically equivalent to DOW CORNING® 246 FLUID. This product is a volatile, low viscosity cyclohexasiloxane fluid for use in skincare, suncare, color cosmetics, hair care, and antiperspirant / .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 241-80W236 Thermoplastic Elastomer A soft, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with NSF 61 for plumbing applications in contact with potable water and contains.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Elastocon TPE Technologies Elastocon® STK40 Thermoplastic Elastomer Elastocon® STK40 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40 is well suited for consumer .. |
|||
Specific Gravity | 0.960 - 0.970 g/cc @Temperature 25.0 °C |
0.960 - 0.970 g/cc @Temperature 77.0 °F |
|
Dow Corning 3-4133 DIELECTRIC GEL KIT Two-part, clear, heat cure, and firm.Information provided by Dow Corning |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D471; ISO 2781 |
Advanced Polymer Alloys DuraGrip™ DGR 6140 UT Thermoplastic Elastomer (TPE) DuraGrip® DGR 6140UT is an unfilled translucent Thermoplastic Elastomer (TPE). It is designed to process easily in injection molding and extrusion applications. DuraGrip® TPE
features excellent so.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 121-68W228 Thermoplastic Elastomer
(discontinued **) A soft, black thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is specially formulated for low density foamed profile extrusion applications and has long te.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 2781 |
LG Chemical LG-604 Styrene-Butadiene-Styrene Description: Linear structure, Non-Oil Extended Grade Thermoplastic ElastomerApplication: Asphalt Modifier, Plastic Modifier, Compounding, Adhesives etcCAS No. 9003-55-8Information provided by LG Ch.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
PolyOne Synprene® ST-6250 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Over-Molding GradeUV StabilizedApplications:Multi-PurposeProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation. |