Polymer Property : Density = 0.0462 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
SABIC Innovative Plastics LNP LUBRICOMP DL003 PC (Asia Pacific) LNP LUBRICOMP* DL003 is a compound based on Polycarbonate resin containing PTFE. Added features of this material include: Internally Lubricated.
Density	1.28 g/cc	0.0462 lb/in³	ISO data
BASF Capron® GR20 HS 20% Glass-Filled Nylon 6 (Dry) (discontinued **) Capron GR20 HS is a heat stabilized 20% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aest..
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183/A
Solvay Specialty Polymers Amodel® AT-1116 HS Polyphthalamide (PPA) (Unverified Data**) Amodel AT-1116 HS polyphthalamide (PPA) is a toughened, heat stabilized 16% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional stabi..
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Nilit FRIANYL A63 KG20 Nylon 6.6 for injection molding, 20% chalk filled Nylon 6.6 for injection molding (low warpage and good form stability).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Density	1.28 g/cc	0.0462 lb/inÂ³	DIN 53479; ASTM D792
Kolon KopaÂ® KN153G30 Nylon 6 Resin KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c..
Density	1.28 - 1.32 g/cc	0.0462 - 0.0477 lb/inÂ³	Fusor 2002
Lord Adhesives FusorÂ® 2001 / 2002 Urethane Adhesive FusorÂ® 2001/2002 is a two-part urethane adhesive system used to bond fiberglass reinforced plastics, sheet molded compound, and bulk molded compound to themselves as well as to primed metals.All ..
Density	1.28 g/cc	0.0462 lb/inÂ³
Momentive Performance Materials TSE322B Black Adhesive Sealant, Non-Corrosive Flowable One-part heat cure. Typical uses: Thermal barrier for automotive parts. Fabric seam seal.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materia..
Density	1.28 g/cc	0.0462 lb/inÂ³
Lord Adhesives HPC-6C Ethylene Acrylic Elastomer Coating LORD HPC-6B and HPC-6C are one-part, room temperature curing ethylene acrylic elastomer (AEM) coatings which feature robust adhesion and exceptional mechanical properties. These coatings enhance ozo..
Density	1.28 g/cc	0.0462 lb/inÂ³
LATI Latilub 57-10T Y/15 PPA, Aramid Reinforced Self-lubricating product based on Semi-aromatic polyamide (PPA). PTFE. Aramid fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by La..
Density	1.28 g/cc	0.0462 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP DL003EU PC LNP LUBRICOMP* DL003EU is a compound based on Polycarbonate resin containing 15% PTFE. Added features of this material include: Easy Molding, UV Stabilized, Internally Lubricated.
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM CRS5001 PEI (Europe-Africa-Middle East) Transparent, Standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones.Resin is RoHS compliant. UL94 V0 listing.
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Ultem DT1810E PEI Blend Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Americas re..
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Ultem DT1810EV PEI Blend (Europe-Africa-Middle East) Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming, UL94 V0 listed.This data was supplied by SABIC-IP for..
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM HU1004 PEI High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability. For medical devices and pharmaceutical applications. Healthcare management of change, biocomp..
Density	1.28 g/cc	0.0462 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP STAT-KON DD0001I PC LNP* STAT-KON* DD0001I is a compound based on Polycarbonate resin containing Carbon Powder. Added features include: ECO FR rating of 94V-0 @ 3.0mm and 94V-1 @ 1.5mm, High Impact.
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM UF5011S PEI (Asia Pacific) Enhanced flow, Specialty filtered Polyetherimide (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming.
Density	1.28 g/cc	0.0462 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP RC006 PA 66 LNP* THERMOCOMP* RC006 is a compound based on Nylon 66 resin containing 30% Carbon Fiber. Added features of this material include: Electrically Conductive.
Density	1.28 g/cc	0.0462 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP THERMOCOMP QC008 PA6.10 LNP* THERMOCOMP* QC008 is a compound based on Nylon 6/10 containing 40% Carbon Fiber. Added feature of this grade is: Electrically Conductive.
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Tisan TISLAMID® 66 20% Glass Fiber Reinforced Nylon 66 TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
Density	1.28 g/cc	0.0462 lb/in³	GB/1033
Zhejiang Juner JEPPB005 High Glossy PP Applications: Shell of Air ConditionerInformation provided by Zhejiang Juner New Materials Co, Ltd.
Density	1.28 g/cc	0.0462 lb/in³	DIN 53479
Polyram RamOfin PPH300G9 Polypropylene, 45% Glass Fiber 45% glass fiber reinforced polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind.
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
EMS-Grivory Grivory® LV-3 ESD PA12-GF30 Product description: Grilamid LV-3 ESD is an antistatic PA12 injection molding grade, with fiber reinforcement of 30%. Due to its special formulation, the material can be used for applications where..
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Eurotec® Tecodur® PB70 BK001 HS PBT, unfilled, improved impact, heat stabilized, black Information provided by Eurotec®
Density	1.28 - 1.32 g/cc	0.0462 - 0.0477 lb/in³	ISO R 1183
Fainplast Compounds FRT 91 Flexible PVC, Insulation Telephone cables
Density	1.28 g/cc	0.0462 lb/in³
3M HDT Heat Shrink Tubing 3M Heat Shrink Tubing HDT is a designed to provide reliable performance as well as excellent mechanical and environmental protection. This flame-retardant product combines the important advantage of..
Density	1.28 g/cc	0.0462 lb/in³
A. Schulman ComAlloy Hiloy® 164 Polypropylene, Mineral Reinforced Data provided by the manufacturer, ComAlloy International Company.40% Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line.
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Akro-Plastic Akromid® A3 GF 20 (2419) PA 6.6 Conditioned, 20% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Density	1.28 - 1.31 g/cc	0.0462 - 0.0473 lb/in³	Average value: 1.30 g/cc Grade Count:3
Overview of materials for PEKK, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "PEKK, Unreinforced". Each property range of values reported is minimum and maximum values of appropriate..