Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Processing Temperature = 20.0 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese FORTRON 6160B4 PPS, 60% Mineral / Glass Reinforced  (Unverified Data**)
Fortron 6160B4 has excellent heat and chemical resistance as well as good electrical properties. This product is inherently flame-retardant and offers high hardness and rigidity. 6160B4 has demonstr..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 1602Z PBT  (Unverified Data**)
Celanex 1602Z is a general purpose, unreinforced polybutylene terephthalate with a good balance of mechanical properties and processability. Celanex 1602Z has an internal lubricant.Lubricated extrus..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 2001 PBT  (Unverified Data**)
Celanex 2001 is an unreinforced polybutylene terephthalate resin with improved hydrolysis resistance developed for use in fiber optic buffer tube applications. Celanex 2001 exhibits the high melt st..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 2300 GV3/20 PBT, 20% Glass Reinforced  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: PBT20% Glass bead reinforced gradeInformation provided by Celanese
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 2401 MT PBT, Medical Technology  (Unverified Data**)
Celanex 2401 MT Natural is an unreinforced, high molecular weight PBT that complies with the requirements of CFR 21 177.1660 of the Food and Drug Administration (FDA) and is listed in the Drug Maste..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 3216 PBT, 15% Glass Reinforced  (Unverified Data**)
Celanex 3216 is a non-exuding (UL and CSA approved V-0 at 1/32 inch and 5V at 1/8 inch ),15% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties ..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese Hostaform® C 13031 K POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with moderate flow and higher strength, rigidity and hardness, with special chalk modifiedInformation provided by Celanese
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese Hostaform® C 52021 POM  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with extremely high flowInformation provided by Celanese
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese VECTRA A435 LCP, 35% Specialty  (Unverified Data**)
Good High Current Arc Ignition (HAI) performance. Glass/PTFE filled.Glass/PTFE, good high High Arc Ignition performanceA three-zone screw evenly divided into feed, compression, and metering zones i..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese VECTRA B230 LCP, 30% Specialty  (Unverified Data**)
Exceptional strength and stiffness. Suitable for metal replacement applications. Electrically conductive. 30% carbon fiber reinforced.30% carbon fiber,exceptional strength and stiffness, conductiv..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese VECTRA E471i LCP, 35% Specialty  (Unverified Data**)
Low warp with excellent propertiesLow warp with excellent propertiesA three-zone screw evenly divided into feed, compression, and metering zones is preferred. A higher percentage of feed flights ma..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese VECTRA MT4350 LCP, 40% Medical Technology  (Unverified Data**)
Mineral filled grade with low warp, easy flow and smooth surface appearance. 40% mineral, low warp & easy flow with smooth surface appearanceA three-zone screw evenly divided into feed, compression,..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese VECTRA S135 LCP, 35% Glass Reinforced  (Unverified Data**)
35% glass reinforced Vectra grade with very low outgassing, very high heat deflection temperature (335°C) and stiffness. Typical applications are lampsockets, lensholders for beamers, electrical a..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese ZENITE 5115L LCP, 15% Glass Reinforced  (Unverified Data**)
Zenite® 5115L is a 15% glass fiber reinforced liquid crystal polymer for injection molding with improved toughness.15% glass-reinforced, lubricatedInformation provided by Celanese
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese FORTRON 1140L4 PPS, 40% Glass Reinforced  (Unverified Data**)
Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently ..
Processing Temperature 20.0 °C
68.0 °F
typically used at ambient temperature
Elmer's Products Aron Alpha® 282F Cyanoacrylate Adhesive (Industrial Krazy Glue™)
Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on..
Processing Temperature 20.0 °C
68.0 °F
typically used at ambient temperature
Elmer's Products Aron Alpha® 801 Cyanoacrylate Adhesive (Industrial Krazy Glue™)
Low odor, low chlorosis (bloom) when a transparent bond, appearance and strength are required.Low gap fill. Ethoxyethyl monomer. Excellent on rubber/plastic substrates. Fair on metal substrates. ..
Processing Temperature 20.0 °C
68.0 °F
typically used at ambient temperature
Elmer's Products Aron Alpha® 802 Cyanoacrylate Adhesive (Industrial Krazy Glue™)
Low odor, low chlorosis (bloom) when a transparent bond, appearance and strength are required.Medium gap fill. Ethoxyethyl monomer. Excellent on rubber/plastic substrates. Fair on metal substrate..
Processing Temperature 20.0 °C
68.0 °F
typically used at ambient temperature
Elmer's Products Aron Alpha® GEL 10 Cyanoacrylate Adhesive (Industrial Krazy Glue™)
Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
hopper
Celanese Celanex® 4305 PBT, 33% Glass Reinforced
Celanex 4305 is a 33% glass reinforced, toughened, thermoplastic polyester.To avoid hydrolytic degradation during processing, CELANEX resins have to be dried to a moisture level equal to or less tha..
Processing Temperature 20.0 °C
68.0 °F
3M Pronto™ CA-7 Instant Adhesive
One-part, room-temperature curing adhesive that is ready-to-use without metering or mixing. Bonded parts reach handling strength in 5-10 seconds on many applications.Very fast setting product with ..
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
hopper
Celanese VECTRA E820i LCP, 40% Specialty
Very easy flowing grade with excellent platability, very good heat resistance and mechanical properties. Mineral filledVECTRA should in principle be predried. Because of the necessary low maximum re..
Processing Temperature 20.0 °C
68.0 °F
BASF Master Builders Solutions ChemRex® CX Concrete Floor Primer - Epoxy
CX Concrete Floor Primer is a waterborne epoxy primer for concrete substrates. It is designed to manage and reduce moisture vapor emission (out-gassing) of concrete slabs by controlling the rate of..
Processing Temperature 20.0 - 25.0 °C
68.0 - 77.0 °F
BorsodChem ONGRONAT CR-30-40 MDI Isocyanate
Description of product: Polymethylene-polyphenyl-isocyanate, 4,4-diphenyl-methane-diisocyanate (MDI) and mixture of its higher functionality, multi-ring oligomers.Field of application: With suitable..
Processing Temperature 20.0 - 55.0 °C
68.0 - 131 °F
cavity
Celanese RITEFLEX 655HS TPC, Unfilled
55 Shore D Hardness heat stabilizedInformation provided by Celanese
Processing Temperature 20.0 - 55.0 °C
68.0 - 131 °F
cavity
Celanese RITEFLEX 677 TPC, Unfilled
Riteflex 677 is a thermoplastic polyester elastomer with nominal hardness of 77 shore D and high modulus.Information provided by Celanese
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Celanese Hostaform® C 13031 XAP POM  (Unverified Data**)
Polyacetal copolymer, reduced emissionhigh stiffnessInformation provided by Celanese
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 2000-3FC PBT  (Unverified Data**)
Celanex 2000-3FC is a general purpose, unreinforced PBT with a good balance of mechanical properties and processabillity for use in food contact applications.. Celanex 2000-3FC is a high flow mater..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® 6407 PBT, 30% Mineral / Glass Reinforced  (Unverified Data**)
Celanex 6407 is a 30% glass/mineral reinforced resin perticularly suited for large exterior automotive components, where extended flow, flatness and good surface appearance is essential.30% glass/mi..
Processing Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Celanese Celanex® J600 PBT, 40% Mineral / Glass Reinforced  (Unverified Data**)
Celanex J-600 is a 40% glass/mineral reinforced resin providing excellent warpage resistance, surface gloss and good mechanical properties. Celanex J-600 is particularly suited to applications requi..
Copyright © lookpolymers.com All Rights Reserved