Wolf Kunststoff ZEDEX® ZX-550 A5L Polymer Alloy

Category	Polymer , Thermoplastic
Manufacturer	Wolf Kunststoff
Trade Name	ZEDEX®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Wolf Kunststoff ZEDEX® ZX-550 A5L Polymer Alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Main Characteristics: Strong anti-adhesive; Low creep; Weather resistant; No water absorption; Good machinability; Strongly viscoelastic; Stress resistantApplications: Chemical Engineering; Laboratory Technology; Automitve Technology; Machine ToolsInformation provided by Zedex

Physical Properties	Metric	English	Comments
Density	2.06 g/cc	0.0744 lb/in³	ISO 1183
Water Absorption	0.010 % @Temperature 23.0 °C	0.010 % @Temperature 73.4 °F	RMC 93%; DIN EN ISO 62
Moisture Absorption at Equilibrium	0.020 %	0.020 %	DIN EN ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	>= 100	>= 100	DIN 53505
Hardness, Shore D	65	65	DIN 53505
Ball Indentation Hardness	36.0 MPa	5220 psi	DIN 2039
Tensile Strength at Break	10.8 MPa	1570 psi	DIN EN ISO 527
Tensile Strength	12.7 MPa	1840 psi	DIN EN ISO 527
Tensile Stress	0.800 MPa @Strain 1.00 %, Time 3.60e+6 sec	116 psi @Strain 1.00 %, Time 1000 hour	DIN 53444
Tensile Strength, Yield	9.80 MPa	1420 psi	Elastic Limit
	12.7 MPa	1840 psi	DIN EN ISO 527
Elongation at Break	92 %	92 %
	92 %	92 %	DIN EN ISO 527
Elongation at Yield	1.3 %	1.3 %	Elastic Yield Point
	2.3 %	2.3 %	Elongation at Maximum Force; DIN EN ISO 527
	2.3 %	2.3 %	DIN EN ISO 527
	4.2 %	4.2 %	Flexural; DIN EN ISO 178
Tensile Modulus	0.800 GPa	116 ksi	DIN EN ISO 527
Flexural Strength	18.9 MPa	2740 psi	DIN EN ISO 178
	19.0 MPa	2760 psi	Outer Fiber Stress at 3.5% Outer Fiber Strain; DIN EN ISO 178
Flexural Modulus	1.17 GPa	170 ksi	DIN EN ISO 178
Compressive Strength	16.0 MPa	2320 psi	Elastic Limit
	1.00 MPa @Time 3.60e+7 sec	145 psi @Time 10000 hour
	12.0 MPa @Time 360000 sec	1740 psi @Time 100 hour
	15.0 MPa @Time 36.0 sec	2180 psi @Time 0.0100 hour
	16.0 MPa @Strain 3.50 %	2320 psi @Strain 3.50 %	DIN EN ISO 604
Compressive Modulus	1.49 GPa	216 ksi	DIN EN ISO 604
Fatigue Strength	7.00 MPa @# of Cycles 1.00e+6	1020 psi @# of Cycles 1.00e+6	1 Hz
K Factor (ISO)	0.50 µm/km @Temperature 20.0 °C	0.50 µm/km @Temperature 68.0 °F
	0.60 µm/km @Temperature 100 °C	0.60 µm/km @Temperature 212 °F
	4.9 µm/km @Temperature 200 °C	4.9 µm/km @Temperature 392 °F
	5.6 µm/km @Temperature 240 °C	5.6 µm/km @Temperature 464 °F
Charpy Impact Unnotched	NB	NB	EN ISO 179/1eU
Charpy Impact, Notched	12.3 J/cm²	58.5 ft-lb/in²	EN ISO 179/1eA
Coefficient of Friction, Dynamic	0.070 @Temperature 100 °C	0.070 @Temperature 212 °F	Dry Operation
	0.11 @Temperature 20.0 °C	0.11 @Temperature 68.0 °F	Dry Operation
Coefficient of Friction, Static	0.12 @Temperature 20.0 °C	0.12 @Temperature 68.0 °F	Dry Operation
Tensile Creep Modulus, 1000 hours	60.0 MPa	8700 psi	At 1% Deformation; DIN 53444
Limiting Pressure Velocity	0.0347 MPa-m/sec	991 psi-ft/min	v = 1m/min
	0.233 MPa-m/sec	6650 psi-ft/min	v = 200m/min
	0.285 MPa-m/sec	8140 psi-ft/min	v = 10m/min
	0.3167 MPa-m/sec	9042 psi-ft/min	v = 100m/min
Compression Set	3.5 %	3.5 %	Elastic Compression Limit

Thermal Properties	Metric	English	Comments
CTE, linear	120 µm/m-°C @Temperature <=100 °C	66.7 µin/in-°F @Temperature <=212 °F	ISO E 830
	160 µm/m-°C @Temperature <=150 °C	88.9 µin/in-°F @Temperature <=302 °F	ISO E 831
Specific Heat Capacity	0.760 J/g-°C	0.182 BTU/lb-°F	DSC
Thermal Conductivity	0.240 W/m-K	1.67 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	327 °C	621 °F	DSC
Maximum Service Temperature, Air	240 °C	464 °F	Continuous
	260 °C	500 °F	Short Term (3h)
Glass Transition Temp, Tg	-20.0 °C	-4.00 °F	DSC
Flammability, UL94	V-0	V-0
Oxygen Index	95 %	95 %	DIN EN ISO 4589

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+19 ohm-cm	1.00e+19 ohm-cm	IEC 93
Surface Resistance	5.50e+12 ohm	5.50e+12 ohm	IEC 93
Dielectric Constant	2.7 @Frequency 110 Hz	2.7 @Frequency 110 Hz	IEC 250
Dielectric Strength	14.0 kV/mm	356 kV/in	IEC 243
Dissipation Factor	0.00030	0.00030	IEC 112
	0.103 @Frequency 1.00 Hz	0.103 @Frequency 1.00 Hz

Descriptive Properties	Value	Comments
Alignment Adjustment	2	Nominal Scale: 1, low; 10, high
Chemical Sterilization	10	Nominal Scale: 1, low; 10, high
Color	Brown
Creep Resistance	1	Nominal Scale: 1, low; 10, high
Dimensional Stability with Thermal Expansion	1	Nominal Scale: 1, low; 10, high
Free from Silicon	Applicable
High Precision Bushings (negative clearance)	Applicable
Injection Molded Parts	Applicable
Machined Parts	Applicable
Moist Heat Sterilization	10	Nominal Scale: 1, low; 10, high
Plastic Granules	Applicable
Resistance Against dust, Dirt, Abrasive Substances	2	Nominal Scale: 1, low; 10, high
Resistance Against Hot Water	250
Resistance to Chemicals	10	Nominal Scale: 1, low; 10, high
Resistant Against Disinfectant	Applicable
Rods up to Øe (de)	Applicable
ROHS/WEEE	Applicable
Sheets up to Maximum Thickness	Applicable
Sliding Velocity	250
Suitable for Outdoor Use	10	Nominal Scale: 1, low; 10, high
Suitable for Use in Water	Applicable
Suitable for Vacuum	Applicable
Tubes (hollow rods) up to Øe (de)	Applicable
UV Rays Resistance	9	Nominal Scale: 1, low; 10, high
UV-Sterilization	7	Nominal Scale: 1, low; 10, high

Users viewing this material also viewed the following: