POLYMER SEARCH

UBE UPIMOL® SA101 Heat-Resistant Polyimide Shape

Category	Polymer , Thermoset , Polyimide, TS
Manufacturer	UBE
Trade Name	UPIMOL®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	UBE UPIMOL® SA101 Heat-Resistant Polyimide Shape.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: UPIMOL® SA101 is an excellent heat-resistant polyimide shape, based on Biphenyl tetracarboxilic dianhydride(BPDA) originally developed by UBE. UPIMOL® SA101 has improved high durability for oxygen plasma, vacuum degassing properties, low water absorption and good processability. Heat distortion temperature is 470°C.Applications: Semiconductor production equipment partsVacuum equipment partsPrecisely processed partsHeat and chemical resistant gaskets and sealing materialsFeatures: Super high heat resistance (Heat distortion temperature: 470°C)Excellent plasma resistanceLow out gasGood processabilityVery low impuritiesLow water absorptionInformation provided by UBE.

Physical Properties	Metric	English	Comments
Specific Gravity	1.48 g/cc	1.48 g/cc	23°C; ASTM D792
Water Absorption	0.030 %	0.030 %	23°C for 24 hr; ASTM D570

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	115	115	ASTM D785
Tensile Strength, Ultimate	110 MPa	16000 psi	ASTM D638
	47.0 MPa @Temperature 260 °C	6820 psi @Temperature 500 °F	ASTM D638
Elongation at Break	4.0 %	4.0 %	ASTM D638
	3.0 % @Temperature 260 °C	3.0 % @Temperature 500 °F	ASTM D638
Flexural Strength	135 MPa	19600 psi	ASTM D790
	51.0 MPa @Temperature 260 °C	7400 psi @Temperature 500 °F	ASTM D790
Flexural Modulus	7.50 GPa	1090 ksi	ASTM D790
	3.60 GPa @Temperature 260 °C	522 ksi @Temperature 500 °F	ASTM D790
Izod Impact, Notched	0.200 J/cm @Temperature 23.0 °C	0.375 ft-lb/in @Temperature 73.4 °F	ASTM D256
Limiting Pressure Velocity	3.53 MPa-m/sec	101000 psi-ft/min	0.1 m/sec; S45C
Taber Abrasion, mg/1000 Cycles	20	20	ASTM D1044

Thermal Properties	Metric	English	Comments
CTE, linear	35.0 µm/m-°C @Temperature 25.0 - 450 °C	19.4 µin/in-°F @Temperature 77.0 - 842 °F	ASTM E233
Thermal Conductivity	0.407 W/m-K	2.82 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	470 °C	878 °F	Heat Distortion Temp, Load Unknown; ASTM D648
Decomposition Temperature	623 °C	1150 °F	10% Weight Loss Temp

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.90e+16 ohm-cm	1.90e+16 ohm-cm	ASTM D257
Surface Resistance	8.50e+16 ohm	8.50e+16 ohm	ASTM D257
Dielectric Constant	3.7	3.7	ASTM D150
Dielectric Strength	22.7 kV/mm	577 kV/in	Breakdown Voltage; ASTM D149
Dissipation Factor	0.0013	0.0013	ASTM D150
Arc Resistance	135 sec	135 sec	23°C; ASTM D495

Descriptive Properties	Value	Comments
Durability for O2 Plasma	6.6 micro gr/cm²hr	Etching Rate Test at 145-150°C
Vacuum Degassing	5.5 x 10^-4 Torr x l/sec x cm²	TDS Analysis at 200°C
	7.6 x 10^-4 Torr x l/sec x cm²	TDS Analysis at 300°C

Users viewing this material also viewed the following: